Can Roadmaster RM-077-6 Dual Hitch Adapter Be Used for Towing a Trailer  

In order to carry a bike rack while also flat-towing a vehicle you'll need a dual hitch adapter, the Roadmaster Dual Hitch Receiver Adapter part #RM-077-2, part #RM-077-4, or part #RM-077-6. Then for a bike rack, you'd just need to make sure…

I recommend using the Roadmaster Dual Hitch Receiver Adapter #RM-077-6 for your bike rack. This adapter will lower your tow bars by 2" which you will want to ensure still give you the +/- 3" height needed for the tow bars to safely operate.…

The Roadmaster Dual Hitch Receiver Adapter, 2" or 6" Drop/Rise #RM-077-6 will be able to hold your spare tire as long as you are not exceeding the tongue weight capacity of the adapter or your trailer hitch. The Roadmaster adapter has a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

We do carry electric brake assemblies as well as hub/drum assemblies. To determine the correct fit, you will need to measure the spindles of your axles. I've attached a photo to assist with the measurement locations, and recommend using a digital…

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

The Correct Track Trailer Alignment and Lift Kit part #RR23QX offers a 1-1/4" or 2-1/4"lift so if the hitch height height is lower than the vehicle hitch height you can use this kit to bring the trailer level with the vehicle and eliminate…

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

The correct replacement leaf spring bushings for any given trailer will be dependent on the width and type of the leaf springs. The most common for a Dexter 10,000 lb Trailer Axle are 3" wide slipper springs. If you have 3" wide slipper…

On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…