How to Get 3 Carr LD Custom Fit Side Steps for a 2020 Mercedes-Benz Sprinter 3500

Question

Question:

I would like a third step for the sliding door on my Mercedes Sprinter, Do the CARR115771 pair and the CAR93MR single match or do they differ? If there is another single that matches the 115771 pair that is 14 inch or 17 inch wide, please advise.

asked by: Jerry E

1

Helpful Expert Reply:

The Carr LD Custom Fit Side Steps # CARR115771 are the exact same as the Carr LD Custom Fit Side Step # CAR93MR and all of these are confirmed to fit your 2020 Mercedes-Benz Sprinter 3500. The only difference between the part numbers is how many steps and corresponding hardware comes with the part number.

Attached are some review videos for you to check out.

expert reply by: Jon G

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 3

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 4

Hi Travis; what you linked was a rear step. I don't have a way to know if the #75549 (for standard bumper) or #75601 (for step bumper) will fit with that FVCO step. The step looks like it fits a standard bumper so I suppose it is possible, but…

view full answer...

Answer 5

The Carr LD Custom Fit Side Steps #CARR115771 are more or less a universal fit step so you should be able to mount it at the rear sliding door on your 2022 Mercedes-Benz Sprinter 2500 as long as the mounting brackets aren't in the same location…

view full answer...

Answer 6

Both the Curt A25 #C24FR and the B&W Companion #BWRVK3715 have a 25,000 pounds towing and 6,250 pounds of vertical load capacity, but there are a few differences between them and I have a couple listed below. First, The B&W can be adjusted…

view full answer...

Answer 7

There is a solution for you, but it may require drilling. Unfortunately, it will not be a traditional running board that fits your 2019 Ram ProMaster 2500 with the 136" wheelbase. I recommend going with the hoop steps, something like the Carr…

view full answer...

Answer 8

Yes, the Carr Single Step part #CAR89MR that you referenced is a confirmed fit for your 2021 Ram ProMaster 2500 that you have.

view full answer...

Answer 9

Hey Val, The threaded hook portion of the HappiJac Qwik-Load Turnbuckles #LC182895 just unscrew, they are just threaded in as they do not even come threaded in when purchased. Depending how long you've had them, there very well may be corrosion…

view full answer...

Answer 10

Hey Chris. They don't give out dimensional drawings for hitches and they don't provide the measurement you're looking for. We did install the Curt Front Mount Hitch item #C52NR on a 2023 Chevy Silverado 2500 and found that the hitch pin…

view full answer...

Answer 11

Hello Brian, I recommend going with the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball - Single Jaw - 21,000 lbs #DM8550046, if you already have a gooseneck ball installed in your 2016 Ram 3500 flatbed. This option will…

view full answer...

How to Get 3 Carr LD Custom Fit Side Steps for a 2020 Mercedes-Benz Sprinter 3500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching