Will The SnapPad EQ Jack Pads Bend And Return To Original Shape Over Uneven Surface?

Question

Question:

After setting on gravel will they reshape back to original shape

asked by: Jim

0

Expert Reply:

Yes, the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet # SN76FR reshape back to the original shape after they are used on uneven surfaces.

The SnapPad EQ Ocotagon Jack Pads # SN76FR will work on any type of surface, level or uneven, including: asphalt, concrete, grass, gravel, mud, sand, resin, ice, and snow.

expert reply by: Bryce D

0

Fleetwood Bounder Motorhome
(click to enlarge)

Answer 1

Hey Phil, yes the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System #SN76FR is the exact same as what comes from Snappad that fit 10 inch hex feet that you asked about. What camper do you have?

view full answer...

Answer 2

There's a bit of overlap in what the SnapPads fit. For example the part #SP84FR4 that you referenced can fit either the 10 inch octagon pads you need or 10 inch concave pads. So while this also fits the concave option that you don't have it…

view full answer...

Answer 3

Thanks for the information David and welcome back! The Hellwig Rear Anti-Sway Bar item #HE78RR is the correct one for a 2026 Ford E-450 chassis. However, for the front you'll need the Hellwig item #HE26GR. This is a 1-3/8" diameter front…

view full answer...

Answer 4

Hey Dennis! Yes, the Roadmaster Front Anti-Sway Bar #RM45GR will fit your 2026 Tiffin Freightliner S2RV chassis. Our fitguide is typically accurate but we're behind on this one. Since Roadmaster says it fits you have nothing to worry about. If…

view full answer...

Answer 5

Hey Richard, thanks for reaching out and providing a photo! I spoke with my contact at TireMinder and they said that there unfortunately aren't any replacement parts for the TireMinder Tire Pressure Gauge #TMG-AAA-Multi. If it was within the…

view full answer...

Answer 6

Hey Bruce, welcome back! The Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles #TMK52VR you looked at is exactly what you need for your Brinkley. This kit is designed for standard 3,500 lb axles which a #84 spindle which includes your Lippert…

view full answer...

Answer 7

The 2013 Kia Soul with manual transmission is flat towable. I have double checked with our manufacturers and this vehicle will work well without any restrictions on speed or any other special circumstances. I recommend using the Roadmaster EZ2 Base…

view full answer...

Answer 8

The correct set of replacement brake assemblies for your AxleTek 12 inch assemblies is the kit part #AKEBRK-7-SA that you referenced. This kit is a pair of left and right assemblies that are an exact match to what you have that are also self…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Will The SnapPad EQ Jack Pads Bend And Return To Original Shape Over Uneven Surface?

Product Page this Question was Asked From

Continue Researching