How Does The Blue Ox Patriot System Get Signal To Apply Brakes

Question

Question:

on the patriot braking system how does the remote control in the rv get its signal from the rv to apply brakes on toad

asked by: Richard S

1

Helpful Expert Reply:

The Blue Ox Patriot Portable Braking System - Proportional # BLU37TR, uses a 12V powered remote that wirelessly connects to the 12V powered braking unit. This wireless remote has an inertia-based sensor in it that can sense the braking of the towing vehicle and communicates that braking need to the towed vehicle. The remote also give you a manual override feature like brake controllers do to allow you to apply the brakes in the towed vehicle as you determine necessary. It also has a light indicator so you know when the brakes are being applied on your towed vehicle from the cabin of your towing vehicle.

This is one of the easiest systems to use and we have had many happy customers using this product because there is no false braking.

I've attached an article to help with supplemental braking systems. Let me know if you have any other questions.

expert reply by: Jason S

1

Dennis

2/5/2020

Does all the sensing to activate the blue ox breaking happen in the floor mount mechanism or is it derived from the sensor on the coach wireless module?

Jacob H.

2/6/2020

The module that gets mounted inside the towed vehicle is what is going to sense the amount of breaking with an inertia sensor. The wireless module that gets mounted in the motor home is going to be the monitoring system so that you can make sure the system is working as it should.

John R.

6/28/2020

Good morning Jason, Have Patriott II model BRK2016 that was purchased 12/9/2018. Serial #161494 from etrailer.Using it on a 2012 Honda Fit. How do I know when the Patriot engages. I have no indication on the 2-Way RF In-Coach controller triangle screen that indicates any braking activity during driving. Setup and cycling works perfect. Intenstity in coach is set on two.Should I see a process bar inside the triangle showing the intensity of breaking? Any assistance is greatly appreciated. Cheers,

Chris R.

7/2/2020

You should be seeing brake activity on the monitor when applying the brakes in the RV. I would increase the force/intensity to 5 - that seems to be a good spot for most applications. See if this changes anything when testing out the brakes during travel.

John R.

7/2/2020

Chris, thanks for the update. I will try it on my next trip to see if I see a difference. From other Patriottt II users I was told previously since I have such a small tow vehicle I wouldn't need more then force/intensity of 2. And the higher settings are used for heavier vehicles. Cheers

Answer 1

Hey Carl, welcome back! For a Blue Ox setup to flat tow your 2022 Jeep Cherokee Trailhawk I recommend the following: -Blue Ox Base Plate Kit - Removable Arms #BX1143 -Blue Ox Alpha 2 Non-Binding Tow Bar #BX7380 (includes safety cables) -Roadmaster…

view full answer...

Answer 2

Hey Bob! We are ahead of manufacturer fitment pretty often, and have confirmed that the Demco Tabless Base Plate Kit #DM38CV will fit the 2026 Maverick Hybrid. Our own etrailer Invisible Base Plate Kit #e96GV shares the same design so you can use…

view full answer...

Answer 3

We don't have any Demco base plate kits that fit your 2013 Mini Cooper convertible, but we do a Roadmaster with the part #521879-1A but it would only fit if yours is an S model. You'd be able to use your current Demco tow bar with it with the…

view full answer...

Answer 4

For your 2011 Mini Cooper S Clubman the correct base plate kit you'd need is the part #521879-1A which is a confirmed fit and would provide you with the attachment point you'd need for a tow bar. In addition to the base plates, you will also…

view full answer...

Answer 5

Hello Derek, thanks for reaching out. It could be an issue with the module on the #BX88285 EZ Light Wiring Harness. It is rare but not unheard of for the modules to go bad. What you do is take a wire tester and check the input and output wires on the…

view full answer...

Answer 6

I'm glad no one was hurt in the loss of your Liberty's brave fit against the cement truck, but don't worry, I can help you equip your Wrangler with the proper products to get it flat tow ready. First, I would recommend the Hopkins wiring…

view full answer...

Answer 7

Yes, the RoadMaster Second Vehicle Kit #RM-98800 will work just fine with your Add a Brake system. This kit includes a breakaway system.

view full answer...

Answer 8

A front mount trailer hitch like #31084 can be used for a winch or for pushing around a trailer to get it in the right position but you can not use it to tow your 1991 Jeep Cherokee. You would not be able to turn properly with a single attachment…

view full answer...

Answer 9

I do have a way for you to use your Avail tow bar with a 3-inch hitch receiver, however, there are no replacement shanks that fit a 3-inch hitch receiver. All you need to use a tow bar that fits a 2-inch hitch receiver in a 3-inch hitch receiver is…

view full answer...

Answer 10

The two parts you are looking at differ slightly in design/size and are actually for different bike racks. For example, the Replacement Anti-Sway Cradle #TH8523486001 is for Thule Raceway TH9001XT and TH9002XT while the Replacement Anti-Sway…

view full answer...

Answer 11

According to my contact at Demco, you can use the Adapter for Blue Ox Tow Bars to Demco Classic Base Plates part #DM9523034 to attach the Blue Ox Avail Tow Bar part #BX7420 to a set of Demco Classic Base Plates like part #DM9517335.

view full answer...

Answer 12

For lighting you can use the bulb and socket kit, #RM-154, and not have to worry about cutting and splicing into the vehicle wiring. This Diode Kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your…

view full answer...

How Does The Blue Ox Patriot System Get Signal To Apply Brakes

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching