SnapPads That Fit The Feet On The Lipppert Ground Control 3.0 Electric Leveling System

Question

Question:

Will this part work with the 9inch Snappads?

asked by: Tom F

1

Helpful Expert Reply:

Yes, the Replacement Rear Foot Pad for Lippert Ground Control 3.0 # LC377962 measure 9", meaning, the SnapPad Jack Pads for Class A and C Motorhomes w/ 9" Round Jack Feet # SP54FR2 will work great.

expert reply by: Bryce D

1

Answer 1

In regards to the SnapPad Jack Stand Pads, if you have round shaped feet then you would measure the diameter from end to end. If the feet measures 9" then you can use part #SP54FR2. I have attached a full list of options below but there are no…

view full answer...

Answer 2

The bottom portion of the SnapPad Jack Pads #SP54FR2 are approximately 1" thick but they are not meant to lift your wheels off the ground. If your wheels came off the ground that would mean you're putting the full weight of your RV onto the…

view full answer...

Answer 3

We should certainly have the correct SnapPads for your 2011 Thor Hurricane 31G. Unfortunately the is no online database we can reference that will tell us exactly what size pads you will need based off of the year make and model of RV. If you will…

view full answer...

Answer 4

Hey Rod, thanks for reaching out. Yes, it will! The Curt Helux Shock-Absorbing 5th Wheel Pin Box #C83RJ will indeed work with the Demco Autoslide 5th Wheel Hitch #DM8550038. Just make sure you also use the Demco Autoslide Locking Plate for Lippert…

view full answer...

Answer 5

Hey Matthew! Thanks for providing that axle information. I reached out to Lippert and for bearings you need the Timken #TMK44FR and #TMK75FR. From what they said, your axle came with an oil bath setup so for the seal you need the Unitized Oil Seal…

view full answer...

Answer 6

Hey Cecil. To replace a front jack on a Lippert Ground Control 3.0 system item #LC358590 or item #LC675817 you will need the Replacement Front Jack item #LC362485. This replacement works on both the left and right sides. What happened to your front…

view full answer...

Answer 7

Hey Greg, welcome back! The Progressive Dynamics 2000 Watt Inverter w/ Transfer Switch #PD64FR prioritizes shore power over battery power. When shore power is detected at the AC input port the transfer switch will automatically disconnect the…

view full answer...

Answer 8

To install the Replacement I-Beam Jack Bracket #LC349975 for Lippert Ground Control 3.0 #LC358590 you'll need to follow the instructions that came with the Lippert Ground Control 3.0. I've attached a cutout from the instructions for the…

view full answer...

Answer 9

Yes, we do offer replacement jacks for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System - 6-Point Set part #LC675817. I have attached these for you below by their location on the trailer. Rear/Middle: 24-1/2" Leg part…

view full answer...

Answer 10

The #PD4590LICSV converter would indeed be the correct Lithium compatible upgrade for your existing PD4590K18NS2 4500 series RV Power Control Center. I've confirmed this with Progressive Dynamics. I've linked to a product description and an…

view full answer...

SnapPads That Fit The Feet On The Lipppert Ground Control 3.0 Electric Leveling System

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching