How Thick Are SnapPad Jack Pads

Question

Question:

How much height do snap pads add to the lift ? Will they take the wheels off the ground when the jacks are fully extended ?

asked by: Michael S

0

Expert Reply:

The bottom portion of the SnapPad Jack Pads # SP54FR2 are approximately 1" thick but they are not meant to lift your wheels off the ground. If your wheels came off the ground that would mean you're putting the full weight of your RV onto the jacks, which is not recommend. These pads are meant to be installed on your jack feet to eliminate the need to crawl under your motorhome to position plastic pads or wood blocks. It also increases the surface area of your leveling jack's feet to provide added support for your motorhome, which will help prevent your motorhome from sinking into soft ground, unlike smaller metal feet.

expert reply by: Kevin C

0

Answer 1

We should certainly have the correct SnapPads for your 2011 Thor Hurricane 31G. Unfortunately the is no online database we can reference that will tell us exactly what size pads you will need based off of the year make and model of RV. If you will…

view full answer...

Answer 2

Yes, the Replacement Rear Foot Pad for Lippert Ground Control 3.0 #LC377962 measure 9", meaning, the SnapPad Jack Pads for Class A and C Motorhomes w/ 9" Round Jack Feet #SP54FR2 will work great.

view full answer...

Answer 3

In regards to the SnapPad Jack Stand Pads, if you have round shaped feet then you would measure the diameter from end to end. If the feet measures 9" then you can use part #SP54FR2. I have attached a full list of options below but there are no…

view full answer...

Answer 4

Hey Robert! That Stromberg Carlson foot won't work but we actually do have the replacement SnapPad for your leveling system. The Replacement Pad for SnapPad Jack Stand Pad System - 9" Round Jack Foot #SP54FR is what you need. It works with…

view full answer...

Answer 5

Hello John, Making the switch over to the SmartPlug is a smart idea =) On the fitment side, yes, the SmartPlug #SM67FR inlet will fit your trailer. SmartPlug inlets are designed specifically to replace the standard RV twist-lock shore power inlet and…

view full answer...

Answer 6

Hey Skip! You will have to measure your feet to see if the SnapPad Jack Pads #SP54FR2 are the right size for a replacement. We don't have a way of knowing what's on there now, and your motorhome isn't in the known list from SnapPad. All…

view full answer...

Answer 7

Hey Brian! The BTBRV Trailer Jack Foot Scale #BTBRV014 is not designed to live on your trailer jack permanently. If you're traveling or storing your trailer you definitely want to remove it and replace it with your standard foot. If you're at…

view full answer...

Answer 8

Welcome back Eric and thanks for the dimensions! For a 124.5” slide-out, you'll need the Solera RV Slide-Out Awning item #LCV000168326 in black or item #LCV000163294 in white. These toppers are 127" wide x 48" long and include the…

view full answer...

Answer 9

The Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round #LC314667 does go inside the square leg that holds the pad. I've attached a photo to assist. It will fit the standard landing gear tube dimensions like you have on your…

view full answer...

Answer 10

The Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round #LC314667 is compatible with your landing gear leg. The Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System #LC362486 will work for your system…

view full answer...

How Thick Are SnapPad Jack Pads

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching