Lippert Components Trailer Jack LC377962 Review Video

Josh, the bolt for the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269 is 7/16" x 1/2" and needs to be torqued to 132 ft.-lbs.

I took a look at the manual for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part #LC358590 and on page 4 it states the proper procedure to extend each of the jacks separately. I have attached this procedure for you below:…

Jack feet #LC377962 for the Lippert Ground Control 3.0 #LC675817 are typically 9" in diameter and round and would require SnapPads like part #SP54FR6. I recommend measuring each of the jack feet to ensure that they're all the same and…

One option is to remove the small foot plate on the Ultimate Trailer Jack #322-RDJ-2K and install a Foot Pad #LC377962 from a Lippert Ground Control System. This foot pad has a 2-1/16" opening while the jack as a 2" inner tube so there will…

Yes, the Replacement Foot Pad for Lippert Hydrualic Leveling System #LC324269 will work with your Lippert Level Up system, on your 2018 Coachman SportsCoach 407FW. I have attached a picture of this foot pad being used on a Level Up system.

You'll have to hold the leg of your jack still so that you can unscrew the bottom of the foot pad to replace it. If you have a large set of channel locks you could do this pretty easily with them. The trick will be hold it tight enough to keep it…

The Ultra-Fab #UF21-001095 wheel chocks are made in China. If you'd prefer a chock manufactured in the US, I'd recommend the #337WC24483 from Buyers Products. If you click the provided link, you can see a video of my buddy Randy demonstrating…

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

The weld bracket on the top of the Ark Drop Down Corner RV Stabilizer Jack Kit #ARK34FR is 4.6063" long and the surface that would make contact is 1.8307" wide. The overall width is 2.8543" on the top. I have attached a dimensional…

There many possible ways to mount a stabilizer jack such as the #TJ01RT-HD you looked at. Mounting them in the orientation shown the diagram would tend to work a bit better to stabilize the trailer against side to side movement, while having the…

I've attached a dimensional drawing for the Ark XO Drop Down Corner RV Stabilizer Jacks #ARK87FR, which displays the measurements in mm and inches. If you need anything else please let me know and I'd be happy to help.

Hey Tyler, so the difference is the amount of motors that each has. The Lippert PSX2 has two and the Lippert PSX1 like the part #LC298707 has a single motor. The foot print and mounting etc. is exact same so this will fit and work great in place of…