CE Smith Trailer Idler Hub Assembly w/ Case # CE13315 For Loadrite Trailer With 2,700LB Axle

Updated 04/05/2022 | Published 04/04/2022

Products Featured in This Question

CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased

(258)

$76.09

Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1

(644)

$5.46

Seal Puller

(147)

$9.43

Question:

Will this work on my loadrite which has hub stamped BT-150A inquiring about product: # CE13315 Mine has has inner 1.25inch inner and outer 1 inch straight spindle

asked by: Scott C

Expert Reply:

According to Loadrite your BT-150A fits a 1.063" straight spindle. I believe the 1.25" measurement you have is for the grease seal. The CE Smith Trailer Idler Hub Assembly w/ Case # CE13315 that you are inquiring does have the correct size bearings for that spindle. You would need to replace the Grease Seal # 34823(1.249" inner) for the grease seal that came on the hub to properly fit your spindle. We currently do not have any hubs that have the same size bearings with the correct grease seal you are needing.

The Seal Puller # PTW1219 will make removing the seal that is already pressed in much easier.

expert reply by: Bud M