Diameter of Neck on Sleeve-Lock A-Frame Trailer Coupler
Updated 04/04/2022 | Published 04/01/2022
Question:
what is the neck diameter the one that locking sleeve rides on
asked by: Tony
0
Expert Reply:
The diameter of the neck on the Sleeve-Lock A-Frame Trailer Coupler - Flip Latch - Black - 2" Ball - 7,000 lbs # CA-5196-B is 2-1/4".
expert reply by:
Robin H
0
Product Page this Question was Asked From
Sleeve-Lock A-Frame Trailer Coupler - Flip Latch - Black - 2" Ball - 7,000 lbs
- A-Frame Trailer Coupler
- Standard Coupler
- 50-Degree Frame
- Weld-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- Flip Latch
- 2-1/4 Inch Hole
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How Wide is the Curt Weight Distribution Shank C17132?
- Article: Thank you!
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: How to Tell the Difference Between a 4-Bolt and a 10-Bolt 5th Wheel Hitch Mounting Rail
- Q&A: Parts Needed To Switch Trailer From Standard Ball Coupler To Pintle Hitch System
- Q&A: Replacement Bearings for Dexter 8-208 Hub
- Q&A: Troubleshooting the 2003 Ford F-350 7.3L Trailer Left and Right Turn Signals & Running Lights Fuses
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements