2 inch Hitch Adapter for Thule Helium Bike Rack

Question

Question:

Hi, Will the hitch adaptor sleeve work for the Thule Helium 3 9043? My car has a 2inch receiver but the Helium 3 is a 1.25 Thanks

asked by: Jack

0

Expert Reply:

For a Thule Helium bike rack the correct 2 inch hitch adapter is the part # TH8523185001.

expert reply by: Jameson C

0

Answer 1

The 2 inch Thule hitch adapter #853-7292 does not fit every bike rack they make unfortunately and it does not fit any version of the Thule T2 bike racks. Since you don't want to replace the shank (understandable) the best work around is the hitch…

view full answer...

Answer 2

Hey Brendan, yes the replacement hitch adapter part #TH72NH is correct replacement for a Thule Helium XT hitch bike rack. Did you lose yours?

view full answer...

Answer 3

The part number you gave me is Thule's part number for Replacement 2" Hitch Adapter #TH8523185001. This is a fit for Thule Apex, EasyFold, or Helium Bike Carriers; this is what you will need to attach the bike rack to a 2" receiver. I…

view full answer...

Answer 4

The screw associated with the discontinued 852-3134-001 you mentioned is the part #852-3136-001 which is a M8x30.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

2 inch Hitch Adapter for Thule Helium Bike Rack

Product Page this Question was Asked From

Continue Researching