Correct Bearing Kit for Rockwell American 7K Axle
Updated 03/22/2022 | Published 03/21/2022
Products Featured in This Question
Question:
I have a Rockwell American 7000 pound axle that I need to get a bearing kit for. The product code is PC173045. I can send pictures if needed.
asked by: Jake
Expert Reply:
I don't know about Rockwell American specifically but most 7,000 lb axles will use a 25580 inner and 14125A outer bearing with a GS-2125DL or10-36 grease seal. If this is what you have then we do have a compatible bearing kit, the Bearing Kit for 7K Axles part # BK3-210 (2.125" Seal) or part # BK3-200 (2.250" Seal).
If you don't know what bearings or seal you have then you can use the help article below for assistance.
Product Page this Question was Asked From
Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Shop: Commercial Grade Battery Box for Group 4D Batteries - Vented
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Square Direct Weld Jack - Drop Leg w/ Spring Return - Sidewind - 28-3/4" Lift - 12K
- Search Results: tjd~12000sp~f2
- Shop: Trailer Hub Grease Cap with Rubber Plug, 2.72" - Drive-In for EZ Lube Axles - Qty 1
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Replacement Plunger Pin Assembly for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs
- Search Results: tjd~12000
- Search Results: tjd~12000~cp
- Search Results: tjd~12000~shabus
- Search Results: tjd~12000~hd
- Search Results: tjd~12000~rsp
- Search Results: tru66fr
- Video: Feature Review Dexstar Steel Mod Trailer Wheel w/+0.5 Offset
- Q&A: Offset Wheels Needed for 95 Inch Long Axle to Bring Axle/Wheel Width to 102 Inches or Under
- Q&A: Gray 16 x 6 Trailer Wheel wtih 8 on 6-1/2 Bolt Pattern and 5/8 Inch Offset
- Article: Most Popular Wheel Bearings
- Q&A: Bearings and Races for 7,000 Pound Trailer Axle
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Correct Replacement Bearings and Seals for Dexter 7,000 Lb Axle
- Q&A: Replacement Bearings for a Dexter 7,000 lbs Axle and Wet Bolts for a Morryde CRE 3000
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Spec for a 1/2 Stud with Coned Lugs on a 15 in Steel Wheel
- Q&A: Looking For Replacement Slipper Springs For My 7k Dexter Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle