Single Axle Lift Kit for a 2017 Lance Model 1475

Question

Question:

Do you have a model axle lift kit that will fit a Lance 1475 trailer? single axle?

asked by: Ken W

0

Expert Reply:

From what I could find it looks like your 2017 Lance model 1475 has the Dexter #10 torsion axle. If that is the case, the Torflex Lift Kit # K71-707-01 is the correct lift kit for that axle.

I recommend that you verify that is the axle that you have on your 2017 Lance model 1475 by checking the identification sticker on the axle beam to find the axle number.

expert reply by: Scott S

0

Answer 1

Your 2017 Lance 1475 has the Dexter #10 torsion axle. The lift kit for that axle is #K71-707-01. This will lift your trailer frame by 2-5/8 inches you requested.

view full answer...

Answer 2

Hey Peter, the first thing you'll need is a regulator designed for two tanks like the part #37207-31525. You'll also need a pigtail like the part #100575-12-MBS. How long of a propane hose do you need for the portable generator?

view full answer...

Answer 3

Hi Douglas, Thanks for the photo and since you have the #10 Torflex axle with a 2,300 to 4,000-lb capacity, the only aftermarket option to add lift is indeed the 2-5/8" Torflex Lift Kit - Single Axle #K71-707-01. This is a pretty good amount…

view full answer...

Answer 4

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 9

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 12

Hello Steven, thanks for reaching out. Yes! The Air Lift LoadLifter 5000 Air Helper Springs #AL38FF will indeed fit your 2022 Ford Bronco with the Sasquatch package. All the hardware and brackets will bolt on without modifications. I also recommend…

view full answer...

Single Axle Lift Kit for a 2017 Lance Model 1475

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching