Replacement Spindle Washer for a Trailer that Uses L44649 Inner and Outer Bearings

Updated 08/06/2013 | Published 08/03/2013

Products Featured in This Question

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(3062)

$19.32

Replacement Spindle Washer - Tang Type for E-Z Lube

(771)

$5.60

Question:

I have a trailer axle that is 1-1/16inch and takes an L44649 bearing. I accidentally threw away the spindle washer and need a few more just in case I throw more away and to have some spares. I see that you all have a 1inch spindle washer but not an 1-1/16inch one, will that one work? The axle is not a D ring type.

asked by: Tim F

Expert Reply:

We currently offer several different spindle washers and I have included a link to them for you. However, none of then have an inner diameter of 1-1/16 inches. I recommend using a set of digital calipers to take the measurement because it needs to be as accurate as possible and traditional measuring devices are not quite accurate enough.

You mentioned that the trailer takes L44649 bearings. If both the bearings are the same size then the washer associated with the size spindle that takes these bearings is # 5-101.

expert reply by: Michael H