How to Determine Which Spindle Washer To Use With DL21792 Bearing Kit

Updated 02/03/2020 | Published 02/01/2020

Products Featured in This Question

Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal

(3527)

$21.09

Replacement Spindle Washer - Tang Type for E-Z Lube

(767)

$6.41

Washer For 1" Spindle

(342)

$5.39

Question:

looking for the correct spindle washer for these axels

asked by: Daniel M

Expert Reply:

The washer you'll want to use with the # DL21792 Bearing Kit is going to depend on whether you've got a standard round spindle, an EZ lube spindle, spindle with a tongue slot or a spindle with a D shape. Since you've got a BT8 spindle, the diameter is going to be 1", so we can narrow it down a bit. I've linked our entire selection of 1" inner diameter washers so that you can choose the appropriate replacement, but you'll want to use the same style that your spindle was originally equipped with.

As an example, the 1" Spindle Washer # SW1000 will work on round spindles with a 1" diameter that is not an EZ Lube spindle. If you've got an EZ lube spindle you'll use # 5-101.

expert reply by: Erik B