Can You Use The Curt Rota-Flex Pin Box With a Curt A20 5th Wheel Hitch

Question

Question:

Want to know if the A20 slider hitch will work with the Rota Flex 1116 pin box. I know the Q series will not

asked by: Ron

0

Expert Reply:

Yes, the Curt Rota-Flex 5th Wheel Pin Box for Lippert 1116, # LC176440 is compatible with the Curt A20 5th Wheel Trailer Hitch w/ R20 Slider, # C16541 that you linked to.

expert reply by: Michael R

0

Answer 1

The Curt A25 5th Wheel Trailer Hitch for Ram Towing Prep Package #C16046 will work well with the Roto-Flex pin box. The combination will be a good match for you and this hitch with the specific connection to the factory prep package pucks will make…

view full answer...

Answer 2

The TST TPMS system part #TST-507-RV-6-C would be a great option that has the 6 sensors like you'd need. Basically the caps of your valve stems get replaced with each of the sensors. Or for a flow through setup the part #TST-507-FT-6-C would be a…

view full answer...

Answer 3

Yes, you can use a tonneau cover on your 2022 Chevrolet Silverado 2500 with the B&W Companion OEM 5th Wheel Hitch #BWRVK3775 installed. The top of the hitch will sit between 17" and 19" above the factory mounting points inside your bed.…

view full answer...

Answer 4

For a 2021 Chevrolet Silverado 2500 with a 6-3/4' bed we always recommend using a slide so the nose of the camper doesn't come in contact with the cab of the vehicle when tuning. I am not familiar with the "turn right technology".…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 8

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 9

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

view full answer...

Answer 10

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Having the puck system is a great feature. If you ever plan on loading the bed with mulch, sand or rock you'll quickly find that having rails permanently bolted to the bed floor is a real pain. Not only that, but the pucks look a lot better.…

view full answer...

Can You Use The Curt Rota-Flex Pin Box With a Curt A20 5th Wheel Hitch

Products Referenced in This Question

Featured Help Information

Miscellaneous Media

Continue Researching