Replacement Interior LED Light For Truck Camper On A 2022 Ford F-350

Question

Question:

I am replacing a 18x 5 1/2x 1inch 12 volt two tube fluorescent light fixture in my truck camper over the dining table / walk area and want to use an led light fixture with the as close to the same same dimensions as the one I have to make sure I cover up the existing mounting holes and overhead wiring connections. I saw the Opti-Bright #OPT38FR refrigerated trailer light with almost the same dimensions and was wandering if you would recommend this light for use in the living area or would it be to bright. I will be connection it back up to the existing wall switch in the camper. I have already replaced a three other interior lights in the camper using the Gustafson 18LED surface mount lights with the clear lenses and they worked great and am going to purchase four more of the Gustafson 9LED surface mount light fixtures also with using the clear lenses one for the bath and three over the bed. Any recommendations would be appreciated.

asked by: Gary G

0

Expert Reply:

The Opti-Brite LED Dome Light for Refrigerated Trucks and Trailers # OPT38FR will work fine but it may be quite bright at 1,200 Lumens.

Instead, I recommend the Opti-Brite LED RV Dome Light # ILL10CCB, which feature the same dimensions, but only put out 880 Lumens, which will be easier on the eyes.

expert reply by: Bryce D

0

Answer 1

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 4

Hey Orv, thanks for reaching out. Yes, that Bargman 50-97-410 harness has been discontinued but we do have a suitable replacement for it. Take a look at the following: - Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector for Aluminum…

view full answer...

Answer 5

Hey Brent! The Opti-Brite #ILL28CMB is designed to mount using its integrated flange. A separate overhead mounting bracket like the one in your picture is not something that is available from us or Optronics. If your truck originally used that style…

view full answer...

Answer 6

Your Dometic Fantastic Fan model 810034 will use the Replacement Fan Motor Assembly Kit #FVK8017-00. This is a direct replacement for your fan and will not require any modification.

view full answer...

Answer 7

The Create-A-Breeze roof vent is a Fan-Tastic Vent Roof Vent Fans and from your description you have a model 8000 vent. The correct replacement is the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00. I have added a…

view full answer...

Answer 8

Hey Jairo. So we do not offer a direct replacement for the Norcold N611, but we do have a good replacement option for you. It really comes down to what will fit in your cutout space. Take a look at the Norcold RV Refrigerator w/ Freezer - 8.2 cu ft -…

view full answer...

Answer 9

I spoke with my contact at Optronics and they informed me that the Optronics light part #ILL28CMB will sense movement up to 6 feet away and will remain on until no movement is sensed for 2-1/2 minutes. The sensitivity and duration are not…

view full answer...

Answer 10

Hey Jeff, welcome back. The Opti-Brite 12V LED RV Dome Light item #OPT58FR is a 12v light that draws 0.74 amps and uses 12 watts. It doesn't draw volts it draws current which is measured in amps based on wattage. This light measures 13-1/2"…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Replacement Interior LED Light For Truck Camper On A 2022 Ford F-350

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching