What Center Cap Fits My 6-1/2 Center Hub with a 10-Lug Pattern?

Question

Question:

I am looking for Freight liner wheel center hub caps. It is 6 1/2 center and 8 1/2 cap diameter. The wheel also has 10 lugs. Do you have something that works?

asked by: Angie P

1

Helpful Expert Reply:

The closest cap we have that matches your measurement is the Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or 8-1/4" Hub Diameter # PXPH1764. This comes with a 6-1/2 center cap requirement. It is also made specifically for a 10-bolt pattern with 285mm bolts.

expert reply by: Bob C

1

Answer 1

Since your bracket and center bolt piece is damaged, I recommend to use the Phoenix USA Wheel Center Cap - 6-1/2" Axle Diameter part #PXQ2010L which comes with the replacement left hand threaded center bolt and bracket. The OEM replacement part…

view full answer...

Answer 2

The part numbers you provided match up with the Replacement Phoenix USA Rear Wheel Center Cap part #PXPH1764 and Replacement Center Attachment Bolt part #PHX84FR. I don't have any way to verify these to the chassis but so long as the pictures…

view full answer...

Answer 3

The Phoenix USA Wheel Center Cap part #PXQ2010 has right hand threads (threads run clockwise) but that does not mean there is a left and right hand cap. You will need to check the bracket of your existing cap to see if there is a L at the end of…

view full answer...

Answer 4

Hey Troy! The Replacement Phoenix USA Rear Wheel Center Cap #PXPH1764 does not come with the brackets but they are available separately. You can choose from the following: -Replacement Right Thread Mounting Bracket for Phoenix USA Wheel Center Caps…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

What Center Cap Fits My 6-1/2 Center Hub with a 10-Lug Pattern?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching