Does Dutton Lainson 1800 lb Winch # DL14627 Come with Strap

Question

Question:

Does this winch come with the strap?

asked by: Imke M

0

Expert Reply:

The Dutton Lainson winch part # DL14627 that you referenced does not come with a strap so you'd need to order the part # DL24249 with it which is a 25 foot long strap.

expert reply by: Jameson C

0

Answer 1

3/8 inch diameter Grade 5 or higher hardware would be what you'd need to mount the Fulton XLT winch part #F142425 that you referenced. A total of 3 bolts would be all you'd need.

view full answer...

Answer 2

First let's talk about capacity since you think you were overloading your Fulton XLT 1801. The reason it says max line pull is 1800 lbs first layer and 800 lbs with a full drum is that for every layer of rope wrapped around the drum the capacity…

view full answer...

Answer 3

The Shelby Trailer Winch 5409B is a single speed brake hand winch with a 2,100 lb capacity. It was discontinued some time ago. In order to replace this winch I recommend using the Dutton-Lainson Hand Winch part #DL15721. The Dutton-Lainson winch has…

view full answer...

Answer 4

I have attached a link to a helpful article that explains how to choose the correct winch for a boat trailer. Here is what the article says: Finding the Right Capacity Winch for your Boat Trailer. Boat-size-to-winch capacity is generally 2 to 1 With…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Does Dutton Lainson 1800 lb Winch # DL14627 Come with Strap

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching