Replacement Seals For A Thetford Toilet On A 2018 Northwood Artic Fox Fifth Wheel

Question

Question:

Do you carry toilet seals for Northwood trailers? part number 340-60 threadford toilet china bowl? If not where can I find parts?

asked by: Karen S

0

Answer 1

If you can measure the distance between your axle centers (wheel centers) and that distance is 35 inches the part #MR27ZR would fit and work great with the shackle strap kit part #MR76ZR. This is a very popular configuration so I would assume it is…

view full answer...

Answer 2

I would be happy to help! The Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/8" Long - 9/16" Center Hole #TREQ356 you were looking at will be an exact replacement for your current equalizers as they have the same 6-1/8"…

view full answer...

Answer 3

The Dexter E-Z Flex Suspension Kit part #K71-652-00 will be a direct replacement for the Equa-Flex Cushioned Equalizers part #LC279687 (5-1/2"). If you have the larger Equa-Flex Cushioned Equalizers part #LC279688 (7-1/2") however then you…

view full answer...

Answer 4

The Never Fail upgrade kits like the #LC281285 have two really distinct advantages. One of them is what you mentioned and is that they don't require greasing or any maintenance. The other is that they last about twice as long as any other heavy…

view full answer...

Answer 5

Suspension gets to be a bit tricky when replacing components with different sizes since there isn't an easy yes or no answer and it requires a bit of playing around to determine what will fit correctly. Your suspension needs to be able to flow…

view full answer...

Answer 6

Hi William; it does make sense and what I can do for you is give you the mounting bolt pattern of the 5-brake flange for the 5.2k to 7k etrailer Electric Trailer Brakes #AKEBRK-7-SA. I have added a diagram below with the measurements showing what the…

view full answer...

Answer 7

According to Dexter, the torque should be between 25-50 ft. lbs. when installing the #23-180-181. If you don't already have mounting hardware you'll need the Mounting Bolts and Hardware for 12" Brake Assemblies #BRKH12.

view full answer...

Answer 8

Based on the photo and information you provided, I can tell you have 12 x 2 inch Dexter brake assemblies for 5.2K axles, for which the Electric Trailer Brake Kit #AKEBRK-7-SA will be an excellent replacement. These are self-adjusting brakes so they…

view full answer...

Answer 9

When installing brake assemblies like the Electric Brake Assembly, #23-27, that you have referenced, there is no specific torque rating when tightening the nuts on the backing plate. Basically you will want them to be as tight as you can get them…

view full answer...

Answer 10

There is no way to determine the correct replacement studs without more information. It could be 1/2", 9/16", or 5/8" so you will need to measure. I have attached a link below to all of our replacement wheel studs so you can choose the…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Replacement Seals For A Thetford Toilet On A 2018 Northwood Artic Fox Fifth Wheel

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching