Mounting Dexter 3,500LB Underslung Axle Below Leaf Springs Rather Than On Top
Published 01/08/2022
Products Featured in This Question
Question:
I bought two 3500 pound Dexter axles. Does it matter if the axles are mounted to the top or bottom of the leaf springs? I wanted a little more height on my trailer so I mounted them to the bottom of the leaf springs, but a friend told me they’re only made to be mounted on top of the leaf springs.
asked by: Ben M
Expert Reply:
The Dexter Trailer Axle w/ Idler Hubs # 7359765-I has an underslung design so that they will mount on top of the leaf springs. The arch in the axle needs to rise in the center of the axle as this will allow for better ground clearance as well as ensure the axle carries the trailer weight properly.
The Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 will allow you to position the axle under your leaf springs to gain the additional trailer height you are wanting. These will maintain the correct orientation of the axle with it now mounted under the leaf springs. You will need one kit per axle.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" Long - 3.5K
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Search Results: trailer axles
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Search Results: trailer jack
- Shop: Brake Controller
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer leaf springs
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
on Trailer Axles
