Will The Dexter Trailer Idler Hub Assembly For 12K Axles Work With Disc Brakes.
Updated 01/04/2022 | Published 01/03/2022
Question:
Needing to know if an 8-214-8 will work for a Dexter 12k disc brake application or not. Hubs seem to be the same other than the 8-214-10 comes with the rotor mounting studs installed where the drum mounting bolts screw into.
asked by: John J
0
Expert Reply:
Yes, the Dexter Trailer Idler Hub Assembly for 12,000-lb Axles - 8 on 6-1/2 - Oil Bath # 8-214-8UC1 will work with disc brakes.
expert reply by:
David B
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 12,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub
- Oil Bath
- 3984 / 28682
- Standard Grade
- For 12000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 12,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Shop: Trailer Idler Hub Assembly for 10,000-lb Axles - 8 on 6-1/2
- Video: Review of the Dexter Trailer Idler Hub Assembly for 12,000-lb Axles
- Video: Hands-On with the Trailer Idler Hub Assembly for 10,000-lb Axles
- Video: The Low-Down on the Replacement Trailer Hub Wheel Stud, Drive-In, 5/8" x 3-1/8" (Qty 4)
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 12K
- Q&A: Can Hub and Brake Drum Be Replaced with Idler Hub on Tandem Axle Trailer
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12-1/4" - Left/Right Hand Assemblies - 12K
- Shop: Dexter Trailer Hub and Drum Assembly for Heavy-Duty 15K Axles - 8 on 275mm Oil Bath
- Search Results: 010~050~00
- Search Results: 031~030~02
- Q&A: Replacement Bearings for Dexter Axles with 12000-lbs Capacity
- Q&A: Hub Assembly for Big Tex Trailer With Tandem 12k Axles
- Q&A: Lug Nut Torque for a Trailer Wheel
- Q&A: Spline Diameter Of The Replacement Trailer Hub Wheel Stud RG03-120
- Q&A: Dexter Axle Wheel Studs 5/8 Inch Diameter
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: Ultimate Overview of the Replacement Master Cylinder w/ Inline Solenoid for Demco Actuators
- Video: An In-Depth Look at the Replacement Master Cylinder Assembly for Dexter Brake Actuators
- Video: Let’s Check Out the Replacement Master Cylinder w/ Inline Solenoid for Demco Actuators
- Search Results: boat trailer disc brakes
- Search Results: trailer brakes
- Search Results: convert surge brakes electric over hydraulic
- Search Results: boat trailer brake lines
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
Explore Expert Info
![Our Expert]()
on Trailer Hubs and Drums
on Trailer Hubs and Drums
