1/8 inch Diameter Lube Plate for Fifth Wheel Hitch

Question

Question:

I need to find lube plates that are thin. 3/32”-1/8” if possible Thanks

asked by: Marc

1

Helpful Expert Reply:

We have the Reese lube plate part # RP83004 which is 1/8 inch thick like you said you wanted. It is also 12 inches in diameter.

expert reply by: Jameson C

1

Answer 1

If you're looking for a lube plate then we do have the 12" diameter Reese Lube Plate #RP83004 which is 1/8" thick and is designed around fitting the Reese Titan 5th wheel hitches. All of our other lube plates are 3/16" thick so…

view full answer...

Answer 2

I spoke with B&W and there are a couple things to double check. The jaws on their Companion #BWRVK3500 are not adjustable, but there is a spring in the middle of them and you will need to make sure that is still there. Next, you will need to make…

view full answer...

Answer 3

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 4

The zerk fittings for the Curt A20 hitch part #C16140 are located on the front of each jaw.The jaws must be in the closed and locked position for the zerks to be accessible. They are kind of hard to see but I attached a picture that points them out.…

view full answer...

Answer 5

In order to determine if you will be able to tow level as is you will need to first level the trailer and then measure from the ground to the bottom of the skid plate on the pin box. Once this is done, you can then measure from the ground to the bed…

view full answer...

Answer 6

When it comes to the 3,000-pound capacity of the RoadActive Suspension Leaf Spring Enhancement Kit - HD #RAS3611-CHD, it is important to note that this kit is not designed to increase your available weight capacity on your 2020 Silverado 3500HD with…

view full answer...

Answer 7

The Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550034 can only use a lube plate that is a maximum of 3/16 inches thick so you can use the #RP83004 that is 12 inches diameter and 1/8 inch thick or the Curt 10 Inch #16721 that is…

view full answer...

Answer 8

The Demco Hijacker Autoslide 5th Wheel Trailer Hitch #DM8550034 comes pre-greased from the factory but Demco does recommend keeping all moving parts well greased and lubricated over time as part of regular maintenance. They recommend simply applying…

view full answer...

Answer 9

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

1/8 inch Diameter Lube Plate for Fifth Wheel Hitch

Continue Researching