Replacement Mounting Hardware For Thule Weekender Cargo Box

Question

Question:

replacement hardware for Thule Weekender cargo box?

asked by: John S

0

Expert Reply:

We do have replacement hardware for the Thule Weekender cargo box; the correct replacement mounting hardware is the following:

- Replacement Mounting Hardware for Thule Weekender Cargo Box # 1032802

I did verify this directly with Thule for you as well.

expert reply by: Kyle S

0

Answer 1

Correct, the Replacement Plate Box Support part #TH10378 which is a direct replacement for the Thule Weekender 627 will install directly beneath the cargo box which you can see in the attached photo. The plates are designed to prevent the mounting…

view full answer...

Answer 2

I went to the warehouse and took a look at the Replacement Mounting Hardware for Thule Weekender Cargo Box #1032802, and it does in fact have 8 bolts.

view full answer...

Answer 3

According to Thule you can use the QM3 mounting hardware, #TH04997, for the Weekender cargo box. The crossbars on your 1998 Toyota 4Runner will need to be up to 3-5/8 inches wide. I have included a picture that shows how this hardware will install.

view full answer...

Answer 4

The part you are looking for is the Replacement Quick On/Off Bracket for Thule QM3 Kit - Qty 1, #TH04973.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Replacement Mounting Hardware For Thule Weekender Cargo Box

Featured Help Information

Miscellaneous Media

Continue Researching