Recommended Vehicle Wiring For Towing a Trailer With a 2022 Hyundai Palisade

Published 12/10/2021

Products Featured in This Question

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

(456)

$227.34

Curt Auxiliary LED Indicator Lights

(245)

$32.94

Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 1-1/4" Hitch

(12)

$12.67

Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2-1/2" Hitch

(20)

$29.24

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(962)

$52.58

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3401)

$101.73

Redarc Tow-Pro Liberty Brake Controller - Dash Knob - Up to 2 Axles - Proportional

(2518)

$190.00

Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers

(420)

$27.00

Question:

I am going to install your hitch on my 2022 Hyundai Palisade but I need some help to find the right wiring. What wiring will I need to tow my trailer properly?

asked by: Gary W

Expert Reply:

As you will be installing the etrailer Trailer Hitch Receiver # e95ZR on your 2022 Hyundai Palisade I recommend the Curt T-Connector Vehicle Wiring Harness # CU94FR. This will give you a 4-way flat connector that is needed for pulling most small trailers or using Auxiliary Lights # C53201 with any hitch mounted accessory that impairs the view of the tail lights on your Palisade. If all your trailer requires is a 4-way flat connector then you are done and only need the Curt Easy Mount Bracket # C58002 to secure the 4-way to your receiver tube.

If your trailer has electric brakes you will need a 7-way connector and brake controller. The Universal Installation Kit for Trailer Brake Controller # ETBC7 and Redarc Pigtail # RED69FR will allow for you to install a Redarc Tow-Pro Liberty Brake Controller # RED24FR. This brake contoller will allow you to have a brake controller with one of the smallest foot prints available. The main unit will mount behind the dash and the control knob can be mounted where it is out of the way and easy for you to access. You will only need the Curt Easy Mount Bracket # C58003 to secure the 7-way on your receiver.