Replacement Bearings for 1986 Long Chih Trailer with 1000 lb Axle
Updated 06/28/2013 | Published 06/26/2013
Question:
Need bearings inners and outers along with dust seals have been unable to match races and seals also spindle part numbers Vin 103731
asked by: Darren B
Expert Reply:
In order to recommend replacement bearings, I will need either the reference numbers from your existing bearings or an accurate measurement of the spindle surfaces where the inner and outer bearings ride and the surface where the grease seal rides (see diagram). The measurements need to be as accurate as possible using a digital caliper. Using a tape measure or ruler will not be precise enough.
If you can provide this information, I would be happy to look for replacement bearings.
Product Page this Question was Asked From
Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Finding Replacement Wheel Bearings for Log Splitter With a 3/4 Inch Diameter Spindle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Bearing Kit Replacement for BT-100 Trailer Hub
- Q&A: What Seal Comes With The DX87UR Bearing Kit
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement 1/2-20x2.25 Wheel Studs
- Q&A: Can Bearings for a 1-1/16 Inch Spindle Replace Bearings for a 1 Inch Spindle Using Same Hub
- Article: Most Popular Wheel Bearings
- Q&A: How to Confirm Correct Size of Grease Seal
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Measure Your Trailer Wheel Bolt Pattern