Curt Universal Fifth Wheel Rail Kit that Fits 2017 Ford F-250 for Use with Pullrite 2700 Hitch

Question

Question:

will this fit my 2017 ford f250 with the 2015 pullright 2700 super glide 16k 5th wheel hitch

asked by: Michael A

0

Expert Reply:

The Curt universal fifth wheel rail kit part # C16200 is a fit for your 2017 Ford F-250 and provides the ISR type of rails that your Pullrite 2700 is designed to fit.

expert reply by: Jameson C

0

Answer 1

The actual position of the bed rails can vary according to which manufacturer's frame bracket you're using. Since most folks tend to order the brackets from the same manufacturer as the hitch, I'll assume unless told differently that…

view full answer...

Answer 2

The OEM puck system is optional for Ford pickups so the only way to tell if your 2017 Ford F-250 has the puck system or not is to physically look in the bed for the pucks like what you see in the attached photo. If you do have the puck system then I…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt #BWRVR3200 will fit your 2018 Ford F-250 with aluminum bed but B&W doesn't recommend it. You will want to use some sort of spacers/isolators that…

view full answer...

Answer 8

Hey Doug. So long as your Husky 5th wheel hitch isn't three decades old you shouldn't have any issues attaching it to the B&W Custom Installation Kit w/ Base Rails item #BWRVK2402. Most 5th wheel hitches for the last 20 years have used…

view full answer...

Answer 9

Hi Seth! The B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs #BWRVK3270 will fit any industry standard rails (also referred to as ISR) perfectly, but there are technically a few rails out there that it will not fit. Those…

view full answer...

Answer 10

Tony, that's a great question, and you're absolutely right to double-check before ordering. Yes, etrailer part #PD69RR is the Progressive Dynamics PD9345V converter charger. The PD69RR number is our internal etrailer part number, while…

view full answer...

Answer 11

Hello Sean, Thanks for writing in. For a replacement hardware kit you will want to order the Replacement Hardware Kit for Trailer Hitches #RHK. Above "ADD TO CART" you will need to put "Curt C15410" so the warehouse knows what…

view full answer...

Answer 12

Hey Aaron, welcome back! Since your 2017 Ford F-250 has 5th wheel rails installed you've got a wide range of options. The Demco Autoslide 5th Wheel Trailer Hitch item #DM8550035 you were looking at would definitely work. This is the Cadillac of…

view full answer...

Curt Universal Fifth Wheel Rail Kit that Fits 2017 Ford F-250 for Use with Pullrite 2700 Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching