Is the Drill Attachment for Trailer Valet XL Included with the Trailer Valet XL Trailer Dolly

Question

Question:

Item # TVXL25 Good morning, does this item above, with the drill attachment #TVDA?

asked by: Hani H

0

Expert Reply:

Yes, the Trailer Valet XL Trailer Dolly with Chain Drive # TVXL25 does come with the Drill Attachment for Trailer Valet XL # TVDA included. The # TVDA will also be the correct Replacement Drill Attachment should you need a replacement or extra drill attachment.

expert reply by: Scott S

0

Answer 1

Bob, Sikaflex 715 part #SI78FR is a good choice for resealing your skylight on an EPDM roof. Since it's a semi self-leveling sealant, it will flow just enough to smooth itself around the skylight flange and cover fasteners, but it isn't so…

view full answer...

Answer 2

Hello Sharman, thanks for reaching out. We don't have that exact SikaFlex 715 sealant in black, but we do have something very similar. Take a look at the following: - Alpha Systems 1021 Self-Leveling Sealant for RVs - Black - 10.3 oz - Qty 1…

view full answer...

Answer 3

Hey Brandon, There are not just generic brackets for awnings in general, but the Swagman #S80510 is able to have an awning attached to it. Something like the Thule Overcast #TH8002AW604 will be able to install around those square bars and set you up…

view full answer...

Answer 4

Trailer Valet will officially state that the #TVXL2 should only be used on concrete/asphalt and not on gravel or dirt applications since like you have found out the traction just isn't good enough and the wheel will spin. So while there isn't…

view full answer...

Answer 5

The Swagman Roamer LT Roof Rack for Pop-Up Campers and Camper Shells - Steel - 7' Long - 150 lbs #S80510 can be safely installed on your cargo trailer. You will simply want to account for the weight capacity of the rack, the trailer components,…

view full answer...

Answer 6

There are a couple things that will help make sure that you are installing the Swagman Roamer LT Roof Rack for Pop-Up Campers and Camper Shells - Steel - 7' Long - 150 lbs #S80510 on your pop-up camper. The first tip is to make sure that the…

view full answer...

Answer 7

We don't have a way to check to see if you have a metal framework in the roof of your 2013 Rockwood HW276 to determine if the #SR1020 could attach to it but it can install through the roof either way. I'd rather recommend you the Swagman part…

view full answer...

Answer 8

Yes, you can replace the larger ball of your Trailer Valet RVR with the part #TVHB2 to convert it to a 2 inch ball.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Is the Drill Attachment for Trailer Valet XL Included with the Trailer Valet XL Trailer Dolly

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching