Swagman Quad Bike Rack for 2004 Mercury Mountaineer

Question

Question:

Hi, We were looking for a 4 bike platform carriers. It looks like the Quad has extra features and some items like cable locks and anti rattle pins. Is there anything else needed for this carrier? Otherwise, I would be tempted to go with the xtc. Thanks

asked by: Rob S

0

Expert Reply:

The Swagman Quad Bike Carrier you referenced, part # S64FR and the Swagman XTC4, # S64665 include everything necessary to carry your bikes, including the anti-rattle hitch lock and braided steel cable lock to deter theft. You should need nothing else to carry your bikes.

I would recommend taking a quick bumper clearance measurement to make sure the racks will be fully compatible with your vehicle. Measure the distance from the hitch pin hole rearward to the point where you clear the rear bumper. (See the FAQ article I have linked you to.) The Quad 4 requires that this measurement be less than 9 inches to be able to install and fold up flat against the rear of the vehicle. The XTC 4 will only fold up into the storage position if this dimension is less than 3 inches.

If the measurement checks out, either rack would be a great choice for you and will work very well.

The primary difference between the two is the higher weight capacity of the Quad 4, 45 lbs max per bike versus 35 lbs per bike for the XTC4. There are other differences. The Quad 4 can handle tires up to 3 inches wide, while the XTC4 is limited to tires up to 2-1/2 inches in width. The straps that hold the wheels are also a bit more robust and easier to use on the Quad 4 model. The Quad 4 weighs just a bit less than 80 lbs, while the XTC weighs around 60 lbs.

In addition to the FAQ article I mentioned earlier, I have also linked you to the installation/user instructions for both racks.

expert reply by: Mike L

0

Answer 1

Provided your 2003 Toyota 4Runner has a 2 inch trailer hitch the Swagman Quad bike rack #S64FR will fit just fine. You will want to measure from the center of the hitch pin hole straight back to the distance required to clear the rear of the vehicle.…

view full answer...

Answer 2

There are a few platform style bike racks that can be converter from 2 bike racks into 4 bike racks. I'll provide a short list below: - Hollywood Racks Sport Rider SE #HR1450Z and add on #HR1475Z or #HR1400Z (complete 4 bike rack) - Swagman…

view full answer...

Answer 3

Hey Pete, thanks for reaching out! The Benton Shifts&Grins Bike Rack for 2 Bikes #B54FR has the extension available as part #B34FR for when you're needing to carry more bikes. If you need to carry 3 or 4 bikes right out of the gate, then you…

view full answer...

Answer 4

Hello Joseph, yes there is! What you are looking for is the Anti-Rattle Hitch Lock and Cable Lock for 2" Hitch Mounted Bike Racks #e88RV. This will work with the Benton Bike Rack #B54VR, as well as the #B94FR and #B54FR so that the bike and rack…

view full answer...

Answer 5

Thanks for checking, Angie. While the Thule Outpace 2 Bike Rack #TH39SA is rated for passenger vehicles and motorhomes, it’s not currently approved for use on flat-towed vehicles like your CR-V in tow. The added torque from towing can stress the…

view full answer...

Answer 6

Hey Mike! The Benton Shifts&Grins Bike Rack for 4 Bikes item #B82FR does not have any built in locks which is a big part of why it comes at such an affordable cost compared to other manufacturer's offerings. You can easily secure your bikes…

view full answer...

Answer 7

Hello Stephan, I was able to go out and get the measurements you requested. From the center of the hitch pin hole to the top of the Benton Shifts&Grins #B82FR when it’s folded up to the highest point is 71". When the rack is in use, the…

view full answer...

Swagman Quad Bike Rack for 2004 Mercury Mountaineer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching