Replacement Valves For The Bristol Double RV Waste Valves Part # 34466ND14AAR

Question

Question:

Can the 8 bolts be removed, valves separated, and outside portions of the original valves be reused instead of solvent welding new fittings?

asked by: John H

0

Expert Reply:

Yes, you can replace the 3" and 1-1/2" valves on your Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Spigot # 34466ND14AAR with the Bristol Waste Valve Body for RV Gray Water w/ Coupler, Seals, and Hardware - 1-1/2" Diameter # 34439241 and the Bristol Waste Valve Body for RV Black Water with Seals and Hardware - 3" Diameter # 34439240.

expert reply by: Kevin C

0

Waste Valve 1
(click to enlarge)

Waste Valve 2
(click to enlarge)

Waste Valve 3
(click to enlarge)

Answer 1

Yes, the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank #34466N4AB96GMA will work with your 24 CSA Z240.3.2 setup as this waste valve is compatible with 3" diameter black-water sewer pipe. If you're referring to replacing…

view full answer...

Answer 2

The Bristol Double RV Waste Valves #34466ND14AAR is about 9" long outside to outside. Attached is a photo showing this as well as a review video you can check out.

view full answer...

Answer 3

The LaSalle Bristol RV Sewer Termination Adapter part #34466V293B3 has a 3" hub fittings so it is designed to slide over a 3" outer diameter black sewer pipe and can then be fused on using the LaSalle Bristol ABS Solvent Cement part…

view full answer...

Answer 4

Hey Rob, thanks for reaching out. According to Lippert, the motor in their Solera power awnings will pull no more than 15 amps at any given time. When the motor is being wound, it will pull no more than 10 or 12 amps depending on the awning length.…

view full answer...

Answer 5

Product #34466ND13AAR is a hub, a hub or a socket is the common female connection to PVC fittings. While #34466ND13BAR is a spigot, which is the end connection to a fitting that has to be assembled into another fitting; the spigot fitting has the…

view full answer...

Answer 6

Hey Frank, since Atwood is no longer in business we can't get replacement legs for their setups which means your best option is to replace everything like with the Lippert #LG-4 that you referenced. We do know that the Lippert kits do fit the…

view full answer...

Answer 7

In order to replace your Carrier Air V RV Air Conditioner I highly recommend using the Advent Air Replacement RV Air Conditioner for Carrier Setup part #ACCAR135 for 13,500 Btu's or part #ACCAR150 for 15,000 Btu's. This unit will be the only…

view full answer...

Answer 8

The outlet tubes on Double RV Waste Valves #T84 are larger than those on Double RV Waste Valves #T84B. On the T84 the 3" Hubs slide OVER your RV's black-water lines. On the T84B the 3" Spigots slide INTO your RV's black-water lines.…

view full answer...

Answer 9

First, trailer tires should always be inflated to the maximum psi indicated on the tire sidewall. this is because trailer tires are built with a thicker sidewall than passenger vehicle tires. If under inflated the thicker tires will generate…

view full answer...

Answer 10

Hey Gary, yes, we do have a base plate for your 2025 Ford Ranger! What you'll want is the Roadmaster Direct-Connect Base Plate Kit #RM23DQ. This base plate has removable arms, has hidden brackets for a non-obtrusive design, and has a simple…

view full answer...

Replacement Valves For The Bristol Double RV Waste Valves Part # 34466ND14AAR

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching