Availability of A-Frame Toolbox Wider than 36 inches

Question

Question:

Do you offer a box wider than 36 ?

asked by: Michael F

1

Helpful Expert Reply:

We have the UWS A-Frame Trailer Toolbox part # UWS01065 which is 49 inches wide at the rear and 18 inches in the front.

expert reply by: Jameson C

1

Mike

10/29/2021

Looking for a steel box wider than 36". Preferably closer to 48". Do you offer such a box?

Reply

Les D.

11/1/2021

@Mike do you like a truck tool box? Or something more like a job box? About 48 inches wide - what about the other measurements? I have included a link with many of the boxes we have.

Helpful Links

s.aspx?qry=aluminum+storage+box&furl=-vw-1-pg-trailer_tool_box

Reply

Answer 1

In order to mount a single axle on a trailer we recommend using a kit like the Single-Axle Trailer Hanger Kit for Double-Eye Springs part #APS4 which comes with hangers, shackles, and shoulder bolts. These can then be paired with a set of leaf…

view full answer...

Answer 2

Good afternoon, Keethe; that's a very good question! In regard to the etrailer Trailer Tongue Tool Box 3.4 Cu Ft #e64VV, I'd say it has similar build quality and features when compared to other options such as RC Manufacturing T-Series…

view full answer...

Answer 3

The trailer jack should very much NOT be powered by the breakaway battery. That was likely done by the previous owner for convenience. The breakaway battery is a dedicated battery for the breakaway system only. It needs to be able to apply the…

view full answer...

Answer 4

Hi Jeff! I know the part you are looking for. It was called the Lippert Spare Tire Winch, and unfortunately, they did discontinue it earlier this year. You may be able to find someone that still has stock, but I can't say where exactly that would…

view full answer...

Answer 5

We do have A-frame trailer tongue toolboxes that are made in the USA, though the MaxxTow MaxxHaul Trailer Tongue Toolbox is made in China. Like you mentioned, the RC Manufacturing toolboxes are made in the USA and are a very high quality toolbox. It…

view full answer...

Answer 6

The Easy Grease Trailer Hub and Drum Assembly #AKHD-865-7-1-EZ-K matches the specs for your Axletek BD-865-37 hub. This hub has an 8 on 6-1/2" bolt pattern with 9/16" lug nuts and studs. It uses the Inner Bearing #25580 and Outer Bearing…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Adam, yes the B and W hitch part #BW47BR that you referenced is a confirmed fit for your 2025 Toyota RAV4 plug in hybrid. What are you planning on using the hitch for?

view full answer...

Availability of A-Frame Toolbox Wider than 36 inches

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching