How To Change The Progressive Dynamics PD4060K Power Center To A Lithium Charging Profile

Updated 11/09/2023 | Published 11/04/2023

Question:

I have the PD4060k with jumper pin not a switch does it charge lithium battery at 14.5 continuously or should I upgrade to PD4060CSV

asked by: Robert

Helpful Expert Reply:

I spoke with Progressive Dynamics and their tech stated that all you'll need to do is remove the little black jumper from the top and middle prongs where it says 'WIZ' and switch it down to the middle and lower prong for 'LI' to be lithium compatible. This switchover will prevent you from having to purchase anything else and have you set for lithium charging. Make sure the power is disconnected prior to switching the jumper over.

expert reply by: Kevin C