Ladder Rack Compatible with Thule Hullavator Pro for Heavy Kayaks

Question

Question:

A huge thank you! Can you recommend a few replacement tonneau covers as well? The one I have is an above the rails type……

asked by: Aaron D

1

Helpful Expert Reply:

Thank you for all of the info! I do have a solution for you but it working really relies on if the rails of the tonneau cover you have for your 2020 Ford F-350 short bed mount inside the bed rails or on top of them. If they mount inside the bed rails then you can use the Thule TracRac SR # TH43003XT-785. If they mount on top of the bed rails then we will need to find you a different tonneau cover as your cover isn't compatible with any ladder rack.

The Thule Hullavator Pro # TH898 will fit just fine on the TracRac SR as long as you use the T-Slot mounting hardware. The Hullavator Pro can carry kayaks up to 36" wide and 75 lbs so your Hobie Compass will fit just fine on this carrier.

expert reply by: Jon G

1

Aaron L.

10/26/2021

A huge thank you! Can you recommend a few replacement tonneau covers as well? The one I have is an above the rails type……

Jon G.

10/26/2021

I'd be more than happy to help you out with a replacement tonneau cover! If you're wanting a simple, cost-effective replacement then I recommend the TruXedo Lo Pro # TX579101 which is a soft, roll-up cover that basically gives your truck bed some protection from the elements. For something that looks just as good but offers more protection I recommend the BAK Revolver which comes with a gloss black finish as the X2 # BAK39330 or a matte black finish as the X4 # BAK99ZR. The Revolver is a favorite around here because it combines the sleek look of a soft cover with the durability and security of a hard cover. This is also a go-to recommendation to fit with the TracRac SR. The best of the best goes to our line of retractable covers. Price and quality range from manual operation like what you find with the JackRabbit # 311-JEFA18A44 up to the powered operation of the UltraGroove # 311-KEFA18A44. Personally I recommend going with the BAK Revolver, but hopefully this short list gives you a good idea of what options you have available!

Answer 1

The Thule T-Rac Pro2 part #TH37003XT that you referenced does come with a toolbox mounting kit that lets you mount a crossover tool box like you have. I attached a picture of them for you to check out as well.

view full answer...

Answer 2

With the 2022 Ford F-250 Super Duty, you can definitely mount ladders and other cargo that extend over the cab of your truck using the Thule TracRac TracONE #TH27000XTB. This is because the crossbars are higher than the cab. I went ahead and attached…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

Answer 12

Hi Frank; the #RP74FR (68204) and #SWW-06 look different because they are a little different. The #RP74FR is only designed to work with the 68220 and 69220. If you have a different Sidewinder this wedge will not fit. It also fits a wider range of 5th…

view full answer...

Ladder Rack Compatible with Thule Hullavator Pro for Heavy Kayaks

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching