Compatibility Of Kodiak Disc Brake Caliper # KDBC250D With HydraStar Caliper Mounting Bracket

Question

Question:

Will this fit in the caliper bracket that comes with the HydeaStar kit?

asked by: Jay F

0

Expert Reply:

Yes, the Kodiak Disc Brake Caliper # KDBC250D will fit the caliper bracket that comes in the HydraStar Disc Brake Kits, like Kit # HSE7K-T1.

We also have the Stainless Steel Kodiak Disc Brake Caliper # KDBC250S and Stainless Steel Ceramic Brake Pads # K250CP-SS if you live near salty areas where corrosion may be more severe.

expert reply by: Bud M

0

Answer 1

You can use the Kodiak Ceramic Brake Pads, part #K250CP, as a replacement for the pads of the HydraStar Disc Brake Kit, part #HSE7K-T1.

view full answer...

Answer 2

Hey Jose! We didn't have this part so I went ahead and added it to our site. The Kodiak Male Brake Line with Brass Flare Nut - 18" - 3/16" Male/Female #KD27FR is the same as the 034-BH-3MFSFF-018. What kind of trailer are you working…

view full answer...

Answer 3

Thanks for the Picture. What you have there is a 6 on 5-1/2" hub for a 3,500 lb axle. We do have a replacement hub for your Truryde RVD-H-65535 hub. The correct replacement will be part #AKHD-655-35-EZ-K. This will include the hub, bearings,…

view full answer...

Answer 4

Double convoluted is the shape/design of the air bags. A double convoluted air bag has two chambers where you see the two bulges on the bag. Single convoluted would just be a single chamber and triple would be with three chambers/bulges sticking out.…

view full answer...

Answer 5

Hey Jude, You can definitely replace the Kodiak brakes you have on your trailer with DeeMaxx as long as they are the same size and rating. From everything you mentioned the DeeMaxx #DE49YR is going to be a good replacement. It is the same bolt…

view full answer...

Answer 6

It sure will Trey. Installing an aftermarket brake controller like the Prodigy P3 Trailer Brake Controller w/ Custom Harness item #TK52HR is going to allow you to bypass the ITB in your 2024 Chevy Silverado 2500. This kit comes with a custom harness…

view full answer...

Answer 7

Hey Gregg, yes you can use the Dexter BrakeRite Electric Over Hydraulic Actuator for Disc Brakes #DX82KR to replace your Replacement Dexter BrakeRite II SD Electric Over Hydraulic Actuator #DX36XR. The only difference is like you already stated, the…

view full answer...

Answer 8

I attached a chart that has the automotive cross reference for the Kodiak disc brake pads part #K2250CP that you referenced under the yellow heading. Probably the easiest to look up would be 1982 to 1992 Chevy Cavalier.

view full answer...

Answer 9

Hi again David; since TDE is no longer around replacement brake pads are not available for the 46304. However, to avoid complete replacement we have found that the Kodiak Disc Brake Caliper #KDBC225DAC will work as a replacement for the 46304. If you…

view full answer...

Answer 10

The Tie Down Engineering (TDE) Brake Actuator 48980 also known as the 80LP/85LP is a 8,000 lb or 8,500 lb disc brake actuator with 2" coupler. In order to replace this, the best option we have is the Demco Hydraulic Brake Actuator part…

view full answer...

Answer 11

Tom, the Kodiak Disc Brakes #KOD69FR you're looking at will work great as a replacement. You're probably already aware that TDE is no longer a company that's in business, so a full replacement is going to be your only choice. This brake…

view full answer...

Compatibility Of Kodiak Disc Brake Caliper # KDBC250D With HydraStar Caliper Mounting Bracket

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching