Do Weight Distribution Systems Offer Replacement Mounting Hardware for Use on 2nd Trailer

Question

Question:

I have 2x trailers that Id like to use a Weight Distributing hitch with - do the manufacturers sell the trailer plates as an accessory so I could have 1 hitch that works with both of my trailers?

asked by: Bob O

0

Expert Reply:

Yes the weight distribution system manufacturers do offer replacement mounting brackets for their systems so that you could have one system that fits two trailers. For example the Blue Ox kit part # BLU87FR that you referenced has replacement mounting hardware with the part # BLU72QR.

expert reply by: Jameson C

0

Answer 1

While you can still use the Blue Ox 2-Point Weight Distribution w/ Sway Control #BLU75FR without the weight distribution bars, I recommend using a lighter set of spring bars. You can use the Replacement Spring Bars #BLU94XR with a trailer that has…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 5

The Blue Ox SwayPro Weight Distribution #BXW1000 hitch incorporates sway into the frame mount brackets used to secure the chains. It uses the constant tension in the trunnions to help force the trailer in line. This is the better option if you are…

view full answer...

Answer 6

I would recommend that Blue Ox TrackPro #BLU77FR simply because it does not have lift chains like the SwayPro #BXW1006. Both will do a great job but the TrackPro will have a little less movement because of the absence of drop chains. Blue Ox is a…

view full answer...

Answer 7

When choosing a weight distribution hitch you'll want the tongue weight of your trailer to fall towards the middle of the prescribed range of the system; it looks like your 2022 Grand Design Imagine XLS 21BHE has a GVWR of roughly 6400-lbs, which…

view full answer...

Answer 8

Hi Steve! With fully loaded tongue weight of your 2022 Grand Design Imagine XLS 22MLE being 775 pounds, you could use the Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 10,000 lbs GTW, 1,000 lbs TW #BLU66FR. This has a tongue…

view full answer...

Answer 9

The correct Equal-i-zer Weight Distribution System for a Grand Design Imagine XLS 22MLE is part #EQ37100ET. This system is rated for 600-1,000 lbs. It might be on the high end of your setup but that's totally fine and what the mfg recommend. It…

view full answer...

Answer 10

Thanks for reaching out Jason. Yes, the shank (drawbar) included with the Weigh Safe True Tow Weight Distribution Hitch #WS26WR can be installed in either the drop or rise position. I've included a screenshot from the installation instructions…

view full answer...

Answer 11

Hey Ryan, congrats on your new trailer! We don't carry Husky anything, but I am going to make a recommendation on a better weight distribution system for you. Since your R Pod has a 6,300 lbs GVWR that's going to put your tongue weight within…

view full answer...

Do Weight Distribution Systems Offer Replacement Mounting Hardware for Use on 2nd Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching