Troubleshooting Bearing Buddy Bearing Protectors Leaking Grease On Wheels and Tires
Updated 09/25/2021 | Published 09/24/2021 >
Products Featured in This Question
Question:
I lost one of the dome type axel hub caps on the rear axle of my tandem axle hauling trailer. So I replaced all 4 with bearing buddy type hubs. I filled the hubs with axle grease till grease started to come out of the whole on the side of each bearing buddy hub assembly. However I have grease coming out of the rear axle bearing buddy and spewing all over the wheel and tire on both sides but worse on the side that originally lost the dome type hub cap. Why would the grease come out like this?
asked by: John P
Expert Reply:
I cannot really tell by the picture due to the grease on the bearing buddy, but it looks like you have one that has auto-check like the Bearing Buddy # BB1980A-SS.
This auto-check gives the grease a place to go instead of blowing out the rear grease seal when pressure gets too high, or too much grease is used.
I would clean off the wheels/bearing buddies really well and check them after a short drive to see if they still leak or if it stopped. More than likely they just had a bit too much grease and were just expelling the excess.
If for some reason they keep leaking grease I just let me know.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Review of CE Smith Trailer Suspension Parts - Shackle Bolts - CES25QR
- Video: What to Know About the etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles
- Video: Checking Out the etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles
- Search Results: trailer leaf springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Lippert Replacement Standard Shackle Links - 2-1/4" Long - 0.224" Thick - Qty 4
- Search Results: 15123
- Search Results: hanger bracket
- Search Results: shackle bushing
- Search Results: static/images/styles/checksvg
- Search Results: leaf spring hardware
- Search Results: nylon bushing
- Q&A: What Type of Grease Comes in CE13515 Idler Hub?
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/4" - Dacromet
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: CE Smith Shackle Bolts with Lock Nuts - 3-1/2" Long - Qty 2
- Q&A: How to Determine the Distance for Mounting Trailer Spring Hangers on a Single Axle Trailer
- Shop: Lippert Replacement Heavy-Duty Shackle Links - 3-1/8" Long - 0.5" Thick - Qty 4
- Shop: Lippert Complete Bearing Kit for 6,000-lb Trailer Axles - 15123/25580 Bearings, 15245/25520 Races
- Q&A: How to Confirm Correct Size of Grease Seal
- Shop: Shackle Bolt for 1-3/4" Wide Double Eye Springs - 9/16" Bolt Diameter - 3" Long
- Shop: CE Smith Safety Chains with S-Hooks - 24" Long - 7600 lbs - Qty 2
- Q&A: Info Needed to Pick Out Leaf Spring for Single Axle Trailer
- Q&A: Hanger Spacing for Tandem Axle Trailer Using 25-1/4-Inch Leaf Springs
- Q&A: How To Determine Hanger Spacing for Single Axle Trailer Suspension Based on Leaf Spring Length
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer



