What is the Diameter of the 9-Tooth Gear of the Replacement Motor for Kwikee Revolution # LC380073?

Question

Question:

Exact diameter of 9 tooth gear ? Thanks

asked by: Bruce

1

Helpful Expert Reply:

The exact diameter of the little 9-toothed gear on the Replacement Motor for Kwikee Revolution Series Electric RV Steps # LC380073 is 15/16 of an inch. I went ahead and included a diagram of the dimension for your convenience.

expert reply by: Bob C

1

Replacement Motor for Kwikee Revolution Series Electric RV Steps # LC380073 Gear Diameter
(click to enlarge)

Answer 1

I was able to find the step originally on your 1989 Winnebago wnc23. It was the Kwikee 3218 which unfortunately no longer has any replacement parts available. You will need to replace the entire step assembly as replacement parts are only available…

view full answer...

Answer 2

I have a more likely solution for you but the Replacement Motor for Kwikee Revolution Series Electric RV Steps #LC380073 is for the Revolution Series steps like the #LC3725791. Which from what I can see, doesn't look like that's what you…

view full answer...

Answer 3

The small gear on the Replacement Motor for Kwikee 25 Series Electric RV Steps #LC369506 is not available as a separate replacement part from Lippert. Unfortunately, that means the only way to replace the gear is to get the entire assembly.

view full answer...

Answer 4

Replacing the motor on your Lippert Components Kwikee 25 Series Triple Electric Step #LC3658373 is a great place to start. The replacement motor that you are seeing on the Kwikee Table Motor and Cable Assembly #LC369529 is part #LC369506. If you end…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Frank, thanks for reaching out! According to my research, the Replacement Motor #LC380073 will work in place of your 300-1457 motor for your Kwikee step motor. Were there any other things you were needing to replace as well?

view full answer...

Answer 8

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 9

Hey Rafael, the correct replacement motor for your Kwikee 32 Series Steps is the Lippert Components Kwikee Motor part #LC379147. What RV are these steps installed on?

view full answer...

Answer 10

Hey Nicholas, thanks for the pics and information. To replace your Dometic Brisk II 9105304474 AC, I recommend the Advent Air RV Air Conditioner System item #ADV99QR in white or item #ADV69QR in black for a ducted setup. The Advent Air RV Air…

view full answer...

Answer 11

The correct replacement for your 300-1406 motor is the Replacement Motor for Lippert Electric Coach Step part #LC301695. If you need other components I would need more info on the steps as this specific motor fits quite a few different steps. If…

view full answer...

Answer 12

Great news, we do carry replacement trailer axles that measure 86-1/2" hub face to hub face like the one you currently have. You would also want to make sure the replacement axle has the same spring center to spring center measurement as your…

view full answer...

What is the Diameter of the 9-Tooth Gear of the Replacement Motor for Kwikee Revolution # LC380073?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching