Curt Trailer Hitch Receiver Compatibility With a 2021 Lexus RX350 F-Sport 2 Package

Question

Question:

Hi there, I bought draw tite trailer hitch for my Lexus 2021 RX350 F-Sport II, the car has stabilizer under, the trailer hitch is not fit. Could you give me some advice, please! Thanks!

asked by: Daniel

0

Expert Reply:

The additional bar that you have on your Level II of the 2021 Lexus RX350 F-Sport appears to be an additional support to stiffen the chassis. There are currently no other receivers that are designed to work with this additional stabilizer under your Lexus. We do not currently have a hitch for your F-Sport version, but we do have a roof rack if that would help you meet your goal.

expert reply by: Bud M

0

Customer Image 1
(click to enlarge)

Customer Image 2
(click to enlarge)

Answer 1

Hey Steve! Welcome back and congrats on the new SUV. To add a hitch and 4-way wiring harness to your new 2026 Mazda CX-5, you'll need the following parts: Hitch - Curt item #C72RJ 4 -Way Wiring Harness - Curt item #C45FV The Curt Hitch item…

view full answer...

Answer 2

We do have a hitch that will fit your 2022 Lexus RX 350 with the Curt #C73DR. This hitch will still allow you to use your liftgate sensor, but you will need to kick to either side of the receiver as opposed to just swiping your foot under the bumper.…

view full answer...

Answer 3

Hey Peter, congrats on the new SUV. The Curt Trailer Hitch item #C72RJ is the correct hitch for the 2026 Mazda CX-5. There is no trimming required for installation. The Curt Hitch item #C72RJ is a class III hitch with a 2" receiver. It is custom…

view full answer...

Answer 4

Hey Rick, this is a great question but you would need to leave the tie down off of your 2026 Lexus RX350 when installing the etrailer hitch part #e29ZV. Its not needed but if you were to somehow need to recover the vehicle you could use the…

view full answer...

Answer 5

I recommend the Curt Adjustable Width Trailer Hitch Receiver #13703. This receiver will allow you to bolt to an RV frame between 22" and 72" wide. You will need to drill the mounting holes for the frame along with holes in the receiver…

view full answer...

Answer 6

Hello Chet, That is correct, you won’t need to remove the underbody or trim any part of your vehicle. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C73DR is a super simple install. The only thing you’ll need to remove is a…

view full answer...

Answer 7

Hey Bob. To install the ground on the Curt T-Connector Vehicle Wiring Harness item #C36PQ you'll want to find a flat metal spot near the converter. You can take a wire brush and clear away the paint to ensure you reach bare metal. Then you'll…

view full answer...

Curt Trailer Hitch Receiver Compatibility With a 2021 Lexus RX350 F-Sport 2 Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching