Installing Curt T-Connector 4-Way Vehicle Wiring Harness # C55317
Updated 09/07/2021 | Published 09/06/2021
Question:
only one end of the T plug fits into the wiring harness I see no single wire plug for the other end
asked by: Craig H
Expert Reply:
I have included a link to the installation instructions below for the Curt T-Connector Vehicle Wiring Harness # C55317. This harness is custom fit for the following vehicles.
1987 - 1994 Dodge Dakota
1986 - 1994 Dodge Ram Pickup
2000 - 2002 Dodge Ram Pickup 3500 - Cab and Chassis
1994 - 1994 Dodge Ram Pickup Pickup - 6-1/2 Foot Bed - Standard or Step Bumper
1994 - 1994 Dodge Ram Pickup Pickup - 8 Foot Bed - Standard or Step Bumper
1986 - 1994 Dodge Ram Pickup Pickup - Deepdrop Bumper
1986 - 1993 Dodge Ram Pickup Pickup - Standard or Step Bumper
1987 - 1994 Dodge Dakota without factory trailer connector
The connectors are designed to plug in line of the factory connectors located at the rear of your vehicle. The connector with the yellow and brown wire if for the drivers side while the green wire connector is for the passenger side. The tail light connectors will include 4 wires but the Curt portion of the harness only needs to connect the 3 wires to get the correct inputs for the trailer lights.
If you are unable to get one of the connectors to connect properly be sure to check both ends of the connector for any damage that may prevent them from connecting and that it is properly oriented.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Visible
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Q&A: Parts Needed to Tow Trailer With Brakes Using 1992 Dodge D250
- Shop: Brake Controller
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55317 Review
- Shop: Curt 4-Way Flat Trailer Connector with Circuit Protected Powered Tail Light Converter
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - Up to 2 Axles - Proportional
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Search Results: diode
- Search Results: wiring
- Video: Curt Wiring - Trailer Connectors - C56496 Review
- Video: Trailer Brake Controller Installation - 1990 Dodge Ram Pickup
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Video: Curt 4-Way Flat Trailer Connector Installation - 2022 Mercedes-Benz GLC
- Shop: Powered Converter Wiring Kit
- Shop: Tekonsha Voyager Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers
- Q&A: Converting a Trailer with a 6 Square Connector to a 4-Way Flat Trailer Connector
- Shop: Vehicle Tow Bar Wiring
- Video: RoadMaster 6 Wire Trailer Connector Installation - 2013 Chevrolet Captiva Sport
- Search Results: hm48605
- Q&A: Curt Or etrailer Trailer Hitch Receiver For a 2001 Dodge Dakota?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: 4-Way Wiring Harness For 1993 Dodge Ram D350 For Brake Controller
- Q&A: What is the Differences Between TowReady T-One # 118329 and Curt # C55329 Wiring Harnesses
- Q&A: Recommended 7-Way Connector and Brake Controller for a 1996 Dodge Ram w/out Factory Connectors
- Article: Double-Eye Trailer Suspension System Review
on Custom Fit Vehicle Wiring
