How To Remove The Pin From The Inno Tire Hold

Question

Question:

Hi. I cant remove the pin. Ive been trying a few times and it remsons stuck.

asked by: Joven Y

1

Helpful Expert Reply:

There is a certain way that the Inno Tire Hold 2 # INH120 pin goes in. It has a specific shape so you will have to rotate that pin until it hits the right spot and then it'll come out no problem. I've included a video for you and around the 7:40 mark you will see what I'm talking about.

expert reply by: Adam E

1

Answer 1

Yes, the Replacement Hardware Kit #RHK is exactly what you need to re-install your Curt Trailer Hitch #C11412. Once on the product page simply select "Curt" from the drop-down menu and type in the model number (C11412) and we will send out…

view full answer...

Answer 2

Thanks so much for your purchase of the Inno Tire Hold 2 Bike Platform Rack #INH120. And that is a good question about how the rack is secured to your hitch, as it doesn't have a traditional hitch pin that goes all the way through, so I'll do…

view full answer...

Answer 3

The B&W Custom Base Rails and Installation Kit for 5th Wheel Trailer Hitches part #BWRVK2506 uses 8 carriage bolts to secure the base rails to the frame brackets. The base rails have 2 square cutouts on each end to accommodate a carriage bolt.…

view full answer...

Answer 4

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

view full answer...

Answer 5

Hey Mark we do have a hardware kit for the 13570 Curt Trailer Hitch our item #C69VV. It is the Replacement Hardware Kit for Trailer Hitches item #RHK. This kit has the carriage bolts, square-hole spacers, serrated-flange nuts, flat washers, and…

view full answer...

Answer 6

Between the Inno Tire Hold #INH120 and the Thule T2 Pro XTR I recommend the T2 Pro XTR hands down. It can handle up to 5" wide tires as opposed to 3" like the Tire Hold, it can accommodate a larger wheelbase (50-1/2"), plus it is a…

view full answer...

Answer 7

One of the major differences between the Inno Tire Hold 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Tilting, part #INH120, has a maximum bike weight limit of 60 lbs and a maximum weight limit on the rack of120 lbs. The Thule Helium Bike…

view full answer...

Answer 8

I was able to locate the Replacement Upright with Hooks for Thule Doubletrack Bike Carrier #753-3929 that you mention for your Thule Doubletrack Platform-Style 2 Bike Rack for 1-1/4" and 2" Hitches #TH990XT, however the replacement upright…

view full answer...

Answer 9

I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…

view full answer...

Answer 10

Hey John, the big difference between the Sherpa part #SH22G and the Transfer part #KU84FR from Kuat is weight capacity, weight of rack, overall ease of use, and price. The Transfer is lighterweight, can carry more weight (60 lb vs 40lb, and costs…

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

How To Remove The Pin From The Inno Tire Hold

Featured Help Information

Miscellaneous Media

Continue Researching