Can a 3-1/2 Inch Spool Roller be Used in Place of a 4 Inch Spool Roller
Published 05/10/2013 >
Question:
I bought 3 4inch spool rollers Yates before i dicscovered your store and they turned out to be 3 1/2. If I use them there will be about 1inch of play within the bracket. Im trailering a 14foot daysailer about 450 lbs. will the short rollers be a problem?
asked by: Barre D
Expert Reply:
The short rollers will only be a problem if they present gaps in coverage or are otherwise not large enough for where they make contact with the boat. And if the play in them is too much, that could cause the boat to shift in transit. You can take up the space using washers. Ideally, you would want to replace the rollers with the right size like the 4 inch spool roller # YR410Y-4 that you have referenced.
Product Page this Question was Asked From
Yates Spool Roller for Boat Trailers - TPR - Fits 4" Long Brackets and 5/8" Diameter Shaft
- Boat Trailer Parts
- Rollers
- Spool Roller
- Plastic
- 4 Inch Long
- Fits 1/2 Inch Shaft
- Yates Rubber
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: grease seals ~ double lip trailer bearings races seals caps
- Shop: CE Smith Keel Roller for Boat Trailers - PVC - 5" Long - 5/8" Shaft - Amber
- Shop: CE Smith Keel Roller for Boat Trailers - PVC - 8" Long - 5/8" Shaft - Amber
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles
- Shop: Timken Replacement Bearing and Race Set #17 - L68149 and L68111
- Video: Review of Yates Rubber Boat Trailer Parts - Spool Roller Boat Trailer - YR410Y-4
- Video: Checking Out the Yates Spool Roller for Boat Trailers
- Q&A: Comparing PVC, TPR, and Polyurethane Boat Rollers
- Q&A: Should a Bow Roller be Used in Place of a Spool Roller
- Shop: Yates Spool Roller for Boat Trailers - TPR - 4" Long - 5/8" Shaft
- Video: Hands-On with the etrailer Hub Bearing Kit
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Hub Bearing Kit 3500LB Axle - BK2-100
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer lights
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector


