Does Torklift SuperHitch Magnum # TLD1102-30 Fit 2003 Dodge Ram 3500 with Hellwig Sway Bar

Question

Question:

I purchase a TorkLift SuperHitch Magnum # TLD1102-30 from Etrailer and installed it. I want to put a Hellwig Big Wig Sway Bar on my 2003 Dodge Ram 3500 1 ton dually vehicle. It is stated on this site that the Hellwig Big Wig Sway bar is compatible and will work with the TorkLift SuperHitch Magnum # TLD1102-30, but there are No instructions to reference on how to do it??? Im pretty sure the Hellwig connection vertical arms that attach to the ends of the sway bars with square U bolts and brackets will be in the way of the TorkLift SuperHitch Magnum # TLD1102-30 main side plate structure and are not used? I need instructions before I spend the money purchasing a Hellwig Sway bar. I do Not want to send the sway bar back.. Please advise. Thank you

asked by: Mark H

0

Expert Reply:

We did have a customer come back and tell us that their TorkLift SuperHitch Magnum # TLD1102-30 did fit with their Hellwig sway bar but we don't have specific instructions for the sway bar or the hitch.

expert reply by: Jameson C

0

Hellwig Sway Bar Installed
(click to enlarge)

Answer 1

No. The TorkLift SuperHitch Magnum #TLC1208-30 will not be hindered by your Hellwig Big Wig sway bar; it's actually designed to be used with these types of aftermarket suspension enhancements, so you won't have any problems using both…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 7

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 8

Hey Jonathan, congrats on the new truck! The Universal Mounting Panel item #331-TPSI-001 is what you'll need to install the control knob of the Redarc Tow-Pro Liberty item #RED53CR in your 2026 Nissan Frontier SV. It measures 1-8/16" tall x…

view full answer...

Answer 9

Hey, Stephen! We got just what you need. Since you don't have a tow package, I'm not sure if you have a hitch on your 2025 Ford Ranger so I'll include one just in case. Draw-Tite Max-Frame Trailer Hitch Receiver Part #DT35PR Curt…

view full answer...

Answer 10

Hi Richard! The best brake controllers on the market for your 2023 Ford Explorer XLT are going to be from Redarc. They're super easy to use and set up, and they are very reliable. They are the ones to get. Since you said you will be towing a…

view full answer...

Answer 11

Using the cut off wiring harness you have for the P3 part #90195 you will wire it to the brake controller wiring of your 2023 Ford Ranger which is sticking out of the large wire harness that goes through the driver's side firewall, left of the…

view full answer...

Answer 12

Hello Dan, We can most definitely get you set up to use your Redarc Tow-Pro Liberty brake controller in your 2022 Toyota Highlander. Since you were looking at the #ETBC7, I’m assuming your Highlander does not have the factory tow package. To equip…

view full answer...

Does Torklift SuperHitch Magnum # TLD1102-30 Fit 2003 Dodge Ram 3500 with Hellwig Sway Bar

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching