Replacement Lid Support for Yakima Skybox 18

Question

Question:

Parts look exactly the same but this part is listed for a rocket box 15. Thanks

asked by: Cam M

0

Expert Reply:

The part # 8870094 is exactly the same as what you send in a picture of so if that's what you have this would be correct as a replacement.

expert reply by: Jameson C

0

SkyBox Hinge in Box
(click to enlarge)

Answer 1

I checked with Yakima and for your Skybox 16 the correct lid support for the rear is supposed to be part #8870072 and for the front is part #8870090. The picture you submitted shows a broken or twisted part #8870090 so that is what you'd need as…

view full answer...

Answer 2

Yes, the Replacement SuperLatch Handle Assemblies part #Y8880348 will be a direct replacement for your Yakima SkyBox 16s Rooftop Cargo Box 8007178. It is the exact same assembly that you have attached a photo of. I have attached a list of other…

view full answer...

Answer 3

Yes, the Replacement Lid Support for Yakima RocketBox item #8870094 will also work with the SkyBox cargo boxes which is what the 8870072 part number you referenced is for.

view full answer...

Answer 4

The Replacement Rear Lid Support for Yakima SkyBox 12 and SkyBox 16 Rooftop Cargo Boxes 2009 and Newer 8870088 was originally attached with the rivets you have attached a picture of. The new support comes with screws that are used instead. You can…

view full answer...

Answer 5

Hello John, thanks for reaching out. We do have the replacement lift hinges for the Yakima SkyBox 16. For that you can use the Replacement Lid Support for Yakima Cargo Boxes #8880684. That said, the pieces riveted to the top lid are not replaceable,…

view full answer...

Answer 6

For starters, there are a few different generations of the Yakima SkyBox 16 and I would need to know which one you have in order to recommend the correct replacement hinges. I called Yakima and they were not able to reference the part number you…

view full answer...

Answer 7

Thank you for all of the info and pictures! I forwarded them on to my contact at Yakima and it looks like you have the old SkyBox Pro 16 Silver 8007179. Even though this box has been discontinued we do have quite a few replacement parts for it: Cam…

view full answer...

Answer 8

I spoke with Yakima, and they said the correct replacement for both the front and back of your Yakima SkyBox Pro 16S is the Replacement Lid Support for Yakima Cargo Boxes #8880683. So since you need one for the front and the back, you'd just need…

view full answer...

Answer 9

The correct updated front and rear hinge/lid support for a Yakima Skybox 18 is the Replacement Lid Support for Yakima Cargo Boxes part #8880683 for the front and then the Replacement Lid Support for Yakima Cargo Boxes part #8880684 for the rear. I…

view full answer...

Answer 10

There isn't any type of special removal available for a stuck Yakima lock core, as it sounds like you tried the only remedy that we generally suggest, which is a lubricant. Otherwise, the only way to remove it really is by having it drilled out;…

view full answer...

Answer 11

So even though your Yakima SkyBox 18 #Y07336 or SkyBox21 #Y07337 has the diamond shaped hinges currently, those are an older model hinge that is no longer used by Yakima; you also won't be able to use the Replacement Front Lid Support 8870090…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Lid Support for Yakima Skybox 18

Continue Researching