Replacement Tail Light Lens For Wesbar 30-003 4-5/8" Square Tail Light

Question

Question:

Hello, I am in search of Wesbar #30-003 square 4-5/8 x 4-5/8 red tail light lense. Please let me know if of any matched products, Thanks

asked by: John S

0

Expert Reply:

The Wesbar Red Square Replacement Lens # 745369 is the correct replacement lens for the Wesbar lens with marking 30-003.

expert reply by: Bud M

0

Answer 1

Hey Joshua thanks for the question. The only lift kit we used to have for a 3,500 lbs diamond torsion axle is the Single Diamond Torsion Axle LC270682. We have not carried it for over a year though. Lippert's part number for it is 270682.…

view full answer...

Answer 2

The only way to get a new control panel would be to replace your entire Smart Jack with part #LC643589. I reached out to my contact at Lippert who confirmed that the only replacement parts for the jack includes hardware like the pin or the footplate.…

view full answer...

Answer 3

I checked your order notes and was able to determine that you bought a Pro Series 15k Hitch part number 30056 which has been discontinued. I spoke to my contact at Draw Tite/Pro Series and he informed me that the head of your hitch, part #58165 would…

view full answer...

Answer 4

I took a look at the available shrouds we have for your Coleman Mach 15 air conditioner, and the only shroud we offer is the white: -MaxxAir TuffMaxx Replacement RV Air Conditioner Cover for Coleman-Mach RV Air Conditioners #MA00-325001. This cover…

view full answer...

Answer 5

Usually, these springs should not have to be replaced unless they are damaged. You will want to check the Reese Replacement Spring, #30776, and make sure it is not damaged and check the Reese 16K Fifth Wheel Hitch, #RP30047, to make sure that there…

view full answer...

Answer 6

For the 22K-rated Draw-Tite 5th wheel hitch 6021 you can use actuating rod spring part #30776. You can refer to the linked photo to see this items with dimensions.

view full answer...

Answer 7

The Wesbar Red Square Replacement Lens, #745369, is 4-5/8 inches X 4-5/8 inches. It has a marking on the the lens that is #30-003. You might look at the broken lens you have to see if it will have the lens marking of 30-003. I called the supplier…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Replacement Tail Light Lens For Wesbar 30-003 4-5/8" Square Tail Light

Continue Researching