Is There A Platform Hitch Bike Rack That Includes A Ramp And Is Compatible With A Bike With Fenders

Question

Question:

I am looking for a bike rack that eliminates need to have contact points with the frame. I like this Saris model since it will work with my wife Blix Aveny ebike and my regular bike. The problem I see is that my wifes bike has fenders. I think the rack would work with the front tire but the back fender would only allow the support to com up and touch the tire about two inches above the height of the rear hub. If this doesnt work then my next ion would be the Yakama On ramp rack. I worry the support bar will rub on the frame but wonder what your experience is. As you can tell I need a rack with a ramp as I am 70 years old and can no longer lift a heavy ebike. My wife and I ride bikes pretty regularly for exercise. Thanks for your assistance.

asked by: Tim S

0

Expert Reply:

You are correct. The Saris MHS Modular Bike Rack for 2 Bikes - 2" Hitches - Tilting, part # SAR73MR, will not work with your wife's Blix Aveny because the rear fender will interfere with the racks arms. Another reason it will not work is because it is not compatible with travel-trailers. However, the Yakima OnRamp Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount, part # Y36FR, is compatible with travel trailers.

It also comes with a ramp to help you load the heavier ebike. The clamps are padded with ratcheting straps. These clamps will protect the frames of your bike, while the strap ensures you cannot overtighten the clamp when securing your bike. The OnRamp also has a tilt down mast, so you can access the rear of the vehicle at all times, even when the rack is transporting bikes. The rack has an anti-rattle hitch system that reduces the movement between the bike rack and the hitch receiver. The rack comes with cables to lock the rack to your vehicle. You can also add the Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS). part # Y07235, to your rack to secure it to your vehicle.

I have included product description links and video review links below.

expert reply by: Mark Smith

0

Answer 1

We have the Yakima StraightShot Hitch Extension, #Y69VR and the RockyMounts Hitch Extender, #RKY10008, among others. The problem however is that most manufacturers state these type products are not to be used with accessories on RV hitches. The…

view full answer...

Answer 2

Hey Sam! The Swagman Escapee Pro #S85SR will work with a step-through frame since it secures the bikes by the front tires. However, it is for that reason that this won't work with front fenders. The Swagman E-Spec Pro #S45SR will likely require…

view full answer...

Answer 3

The Yakima LockUp Hitch Lock and Cable Lock - Same Key System (SKS) #Y07238 is the cable lock and hitch lock you are seeking. This comes with same key lock cores and keys. For your pin, you will want the Replacement Mounting Hardware for Yakima…

view full answer...

Answer 4

I believe you are referring to the Yakima HoldUp #Y02443. If you need just the HitchLock alone, that is the #Y07235. However, if you need the hitch pin that is compatible with both the HitchLock and the HoldUp itself, that is the #Y8890200.

view full answer...

Answer 5

To replace the threaded hitch pin and lock for your Yakima HoldUp, it will depend on if you have the 2" shank or if you have the 1-1/4" shank with a 2" adapter. For the 2" shank, you will need the Replacement Hitch Bolt and Clip…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hey Steven! For your 2023 Jayco Eagle 355MBQS I recommend the Hollywood Racks RV Rider Bike Rack #HLY64FR. This is rated for 5th wheel use and has a capacity of 80 lbs per bike so it works with standard bikes and e-bikes. It also uses padded clamps…

view full answer...

Answer 9

Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…

view full answer...

Answer 10

Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…

view full answer...

Answer 11

Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…

view full answer...

Answer 12

Hey Marc, sorry for the delay in getting back to you. I checked your question history and I don't see anything from a few weeks ago which can sometimes mean there was a typo in your email address and we sent it to wrong person. This rack has a…

view full answer...

Is There A Platform Hitch Bike Rack That Includes A Ramp And Is Compatible With A Bike With Fenders

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching