How To Determine Which Spare Hub Assembly Is Correct For Spartan Sport Boat Trailer
Published 07/21/2021
Products Featured in This Question
Question:
Hi guys, I have a spartan sport trailer boat trailer that i use for my 15foot Lund boat. Im getting ready to take the boat on vacation with the family and am looking for a complete hub and bearing assembly to have a s a spare. I just greased the bearings and spun the wheels and and checked them for any movement and they seem to spin well and sound good. I dont want to be that guy on the side of the road. Do I need to take the hub off to determine what i need? Thanks for your help
asked by: Scott C
Expert Reply:
I would be happy to help!
Unfortunately we do not have a breakdown of the specific components for your Spartan Sport Trailer, so you will need to remove one of your hub assemblies.
With the hub assembly removed you will need to look on the face of both the inner and outer bearings for the bearing number. This will be stamped in the face of the bearings as shown in the included picture of the # L44649.
If your bearing numbers are not readable you will need to use digital calipers # PTW80157 to precisely measure your spindles in the locations shown in the included diagram.
If you can provide the above information I would be happy to confirm the correct spare hub assembly for your trailer.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Search Results: cotter pins
- Search Results: 07100
- Search Results: bt8 1 " spindle
- Search Results: 1" spindle
- Search Results: 53x12 tire
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range B
- Shop: Agricultural Spindle for 3,000-lb Trailer Axles - 1-3/4" Diameter
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Q&A: How to Determine Which Replacement Hubs Will Fit Spindle
- Video: Let’s Check Out the Trailer Clearance or Side Marker Light w/ Reflex Reflector
- Q&A: Looking for Hub for 1999 Jayco Qwest 10
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Parts Needed To Add Electric Drum Brakes To 1994 Jayco Pop-Up
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Most Popular Wheel Bearings
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements