T-Bolts that Fit Thule Wingbar Evo Crossbars

Question

Question:

Where can I purchase T bolts for the Thule Evo Roof Rack? Id like to attach a custom rack we had built.

asked by: Erik

0

Expert Reply:

The replacement M8 T-Bolt part # 853-5715 fits the Thule Wingbar Evo crossbars.

expert reply by: Jameson C

0

Answer 1

Thanks for the awesome detail in your question! I pulled each part from our warehouse to provide you the measurements requested. The Thule Xadapt12 kit #THXADAPT12 T-bolt head size is 3/4 inches, 7/8 inch long threaded portion and .23 inch diameter.…

view full answer...

Answer 2

There's a few things to consider for the fit to your 2017 Jeep Grand Cherokee Trailhawk, but its fairly easy to make sure you have a good fit. The roof crossbars are the primary fit factor. A little research shows that the Trailhawk is about 70…

view full answer...

Answer 3

Yes, the Replacement M8 T-Bolt part #853-5715 will fit properly within the channels on the Thule Evo WingBar Crossbars. If you are looking for the correct Thule Evo WingBar System to use on your 2019 Kia Niro then you will need to obtain either part…

view full answer...

Answer 4

We have the Thule T-Bolt part #853-0782 which fits the top channels of your Wingbar Evo crossbars, is fully threaded, and has a stud length of 1-7/8 inches like you'd need.

view full answer...

Answer 5

I have a couple of options for you for bolts that are compatible with the T-slots in the Wingbar Evo's but the Rhino Rack item #RR92XB do not fit. Instead you will want one of the following: Replacement Square Head Bolt - 6 mm x 61 mm item…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

T-Bolts that Fit Thule Wingbar Evo Crossbars

Product Page this Question was Asked From

Continue Researching