Will MORryde Hitch Mounted Trailer Stabilizer MR22AR Work On Grand Design Reflection 31MB?

Question

Question:

Will this work on a grand design 31mb. It has quite a bit of tail wiggle and we are just looking for a more stable experience.

asked by: Patrick B

0

Expert Reply:

As long as your Grand Design Reflection 31MB has a 2" trailer hitch receiver on the back of it, and from the center of the hitch pin hole to the ground measures 19" - 39-3/4" then the MORryde Hitch Mounted Trailer Stabilizer for 2" Trailer Hitches # MR22AR you were looking at will work perfectly.

The # MR22AR will do a great job of providing extra stabilization to your trailer while it is parked.

If you do not already have a trailer hitch receiver on your 31MB you can add one using the Curt # C13701 if your frame is 18" - 51" wide, or the # 13703 if your frame is between 22" - 72" wide.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Yes, you can install the Lock N Roll Articulating Hitch #336VS503 on the Curt Channel Style Adjustable Ballmount #C45900. The holes on the Lock N Roll are 5/8" diameter and spaced every 2" on center. This will fit the Curt having the same…

view full answer...

Answer 2

Yes, the channel of the Curt Channel Style Adjustable Ballmount #C45901 that you referenced is compatible with the Replacement 2" and 2-5/16" Dual-Sided Hitch Ball #C45912.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Will MORryde Hitch Mounted Trailer Stabilizer MR22AR Work On Grand Design Reflection 31MB?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching