Can I Use A Yakima Cargo Box With A Rhino Rack Roof Rack?

Question

Question:

Can I safely store a large Yakima cargo box 93” long, 36” wide, 17” high in a Rhino Rack?

asked by: Dan S

0

Expert Reply:

You can use cargo boxes from different brands on other branded crossbars. The Yakima Skybox # Y07337 is about that size and will work with any Rhino Rack roof rack as long as the bars are less than or equal to 3-1/2 inches wide and 1-11/16 inches thick. It'll need a crossbar spread between 24 and 42 inches!

expert reply by: Adam E

0

Answer 1

The Thule Xsporter Pro Truck Rack has the top channel, so the Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 58" Long x 47" Wide #RR42115BF is directly compatible even though the bars are thicker. I've attached a…

view full answer...

Answer 2

The Yakima SkyBox NX 16 Rooftop Cargo Box #Y95AV will fit your Rhino Rack aero crossbars. This box can fit crossbars that are up to 3-1/2" x 1-11/16" and the bars you have are 3-1/8" wide x 1-3/16" tall so the box would fit…

view full answer...

Answer 3

The Yakima FatCat EVO 6 Ski and Snowboard Carrier #Y03096 and the smaller Evo 4 #Y03095 both include excellent mounting hardware that will fit any shape of roof rack crossbar, including factory bars, up to maximum bar dimensions of 3-7/16-inches wide…

view full answer...

Answer 4

The Yakima SkyBox 16 Roof Cargo Box is compatible with bars measuring up to 1-11/16" tall x 3-1/2" wide. The Yakima HD Crossbars like part #Y01159 measure 1-1/2" tall x 3" wide so they will be a fit for this cargo box. I…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Can I Use A Yakima Cargo Box With A Rhino Rack Roof Rack?

Featured Help Information

Miscellaneous Media

Continue Researching