Slide Toppers For 152, 89, 85, and a 67 Slide Box.

Updated 04/23/2021 | Published 04/22/2021

Products Featured in This Question

Solera RV Slide-Out Awning - 73" Wide - Black

(1345)

$352.88

LaSalle Bristol Butyl Tape for XTRM RV roof membranes - 30' x 3/4" - Gray

(173)

$24.24

Solera RV Slide-Out Awning - 91" Wide - Black

(1345)

$569.50

Solera RV Slide-Out Awning - 97" Wide - Black

(1345)

$504.73

Solera RV Slide-Out Awning - 157" Wide - Black

(1345)

$692.12

Question:

My sizes are 152 inches by 36 inches deep 67 inches. 85 inches and 89 inches. The last 3 are all 23 inches deep. The measure is to the flanges width. What sizes would I need to order and the cost of each. Thank you

asked by: John H

Expert Reply:

For your 67" wide slide out you would want Solera RV Slide-Out Awning Item # LCV000165063.
For your 85" you would need Solera RV Slide-Out Awning Item # LCV000168106.
For your 87" you would need Solera RV Slide-Out Awning Item # LCV000168107.
For your 152" you would need Solera RV Slide-Out Awning Item # LCV000168109.

You want to make sure you have at least 7" of clearance from each side of your slide outs. If you do not have at least 7" of clearance you would need to go to the next canopy size down. If you have to boxes that are close together and do not have the minimum clearance you would want to go down a size on at least one of the boxes. Each canopy can extend up to 50".

Each canopy comes with matching hardware. If your camper does not have factory extrusion rails installed on the walls already, each kit includes the rails. I recommend adding Item # 344270341410-1 on the back of each rail before installing it onto the wall. I have included a link to an install I did on a camper where I am installing the extrusion rail. The instillation process is simple and straight forward.