Does the Solera 13.5' Slider (Slide-Topper) Include the Awning Rail

Question

Question:

If this 13.5inch slider is sold without the awning rails, how does one procure them and how much extra do they cost?? The price doesnt seem to reflect any reduction due to the rails not being included.

asked by: Ken C

1

Helpful Expert Reply:

According to Lippert/Solera, Solera 13.5' Slider (Slide-Topper) # LCV000168109 does include the awning rail. I have included a link to a video showing an example installation for you.

expert reply by: Michael H

1

Answer 1

Since we know your slide out flange measurement is 153 inches from flange to flange the correct slide out awning would be the part #LCV000168109 for black or part #LCV000163300 for white.

view full answer...

Answer 2

For your 67" wide slide out you would want Solera RV Slide-Out Awning Item #LCV000165063. For your 85" you would need Solera RV Slide-Out Awning Item #LCV000168106. For your 87" you would need Solera RV Slide-Out Awning Item…

view full answer...

Answer 3

Measuring for the correct Solera slide topper is pretty easy, all you need to do is measure from the outside to outside of the flange around the slide out and with that I can help you pick out what you need. Get me that measurement and what color you…

view full answer...

Answer 4

For a 153-1/2" slider we have two options, one in black and one in white. I have listed both of them below: White - Solera RV Slide-Out Awning item #LCV000163300 Black - Solera RV Slide-Out Awning item #LCV000168109 Please note that if you…

view full answer...

Answer 5

Furrion/Lippert love to change the part numbers constantly on their products so it can be a bit tricky to find exactly what you're looking for if you don't know the right places to look. The FWHO9A-AM refers to the unit without the door,…

view full answer...

Answer 6

Hi Donald, For a 150" flange to flange measurement you'll need the Solera RV Slide-Out Awning #LCV000163299. This slide topper is designed to fit 146" - 151" flange to flange measurements. Going a size larger than this could…

view full answer...

Answer 7

To retention your Solera RV Slide-Out Awning #LCV000168109 you'll want to extend the slide out and can then get on a ladder and get up to the arms. You'll disconnect the extension rod #LC3452072 from the arm and then can roll the arm 12 - 16…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does the Solera 13.5' Slider (Slide-Topper) Include the Awning Rail

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching